Table of Contents
Advertisement
14
Oudie 3
If however you fly several types of gliders at different
locations you are likely to be fed up with changing the
polar, terrain, waypoint and airspace files each time
before the flight. Profiles were added in Oudie 3
software. You can have separate setups for each of
your gliders or type of flying. Here's how it works.
1. When you first ran Oudie 3, a Default profile was
created. Anything you have changed in the application
was stored to this profile. Now comes a day when you
fly the another glider with a significantly different polar
than the one you have used previously. To avoid
entering the polar, header and hardware data each
time you go fly this glider, you may create a new profile
by going to
Menu > Settings > Miscellaneous
and
102
click the "Add Profile..." button.
© 2003 - 2013 ... Naviter d.o.o.
Advertisement
Table of Contents
