Usb - Naviter Oudie 3 User Manual

Oudie firmware 115
8.2.6

USB

This option allows you to select how Oudie 3 behaves when connected to PC with that USB cable.
In Mass Storage mode Oudie 3 will become a logical drive when connected to PC. After you plug in the
USB cable you will be asked whether or not you wish to "Connect to PC" or "Charge Battery". If you
choose to "Connect to PC" then all running programs on Oudie 3 will be shut down including Oudie 3 and
ConnectMe.
In Active Sync mode Oudie 3 will be recognized as an external device. Transfer speeds are much lower
than in Mass Storage mode, but Oudie 3 and PC connection can work simultaneously.
© 2003 - 2013 ... Naviter d.o.o.