West Mountain Radio RIGblaster Advantage User Manual page 11

If you have more than one USB serial device on your system you can
use the following command to determine which ttyUSB device number is
assigned to the RIGblaster:
ls -l /dev/serial/by-id | grep 'RIGblaster'
This will return a display similar to:
lrwxrwxrwx 1 root root 13 Oct 7 05:42 USB-Silicon_Labs_West_
Mountain_Radio_RIGblaster_Advantage_d5b25d6b-if00-port0 ->../../
ttyUSB0
In this case ttyUSB0 is assigned to the RIGblaster.
To find the RIGblaster Advantage sound card playback device type the
following: aplay -l | grep 'RIGblaster'
To find the RIGblaster Advantage sound card recording device use this:
arecord -l | grep 'RIGblaster'
For older distributions and troubleshooting visit the following support
page: http://www.westmountainradio.com/adv/drv/linux
Macintosh Installation
The RIGblaster Advantage will work with OS X 10.5 and above. Drivers
and instructions are available online:
http://www.westmountainradio.com/adv/drv/macosx
Windows Installation
You have two choices of automatic installation on Windows systems.
Quick Method (For advanced Windows users running Vista,
Windows 7 or Windows 8)
As long as your computer is on-line, you can simply plug in the USB
cable to your computer and the RIGblaster Advantage. This will trigger
the "Found New Hardware Wizard" and you will be asked if you want to
do an automatic install. Answer yes and allow Windows to connect to
Microsoft Update to retrieve the signed drivers.
You will be notified when the process is complete. This can take a few
minutes so be patient.
This method may not work on Windows XP or earlier versions of Win-
dows. In this case you are advised to use the standard method of instal-
lation detailed below.
11
West Mountain Radio Operating Manual