Sony Cyber-shot DSC-H50 Instruction Manual page 143

Digital still camera
Hide thumbs Also See for Cyber-shot DSC-H50:
Table of Contents

Advertisement

Settings
For details on the operation
(iF
page 89
C
Shooting Settings - Shooting Settings 1
The default settings are marked with
<#.
AF Illuminator
The
AF
illuminator supplies fill light to focus more easily on a subject in dark surroundings.
The
AF
illuminator emits red light allowing the camera to focus easily when the shutter button
is pressed halfway, until the focus is locked. The
.~ON
indicator appears at this time.
<#
Auto
Uses the AF illuminator.
Off
Does not use AF illuminator.
• If the AF illuminator light does not reach the subject sufficiently or the subject has no contrast, focus will
not be achieved. (A distance of up to approximately 3.2 m (10 feet 6 inches) (zoom: W)I
2.3 m (7 feet 6 5/8 inches) (zoom: T) is recommended.)
• Focus is achieved as long as the AF illuminator light reaches the subject, regardless of whether light fails
to reach the center of the subject.
• You cannot use the AF illuminator when:
- [Semi Manual] or [Manual Focus] is set (page 46).
-
:~.
(Advanced Sports Shooting) mode,
~
(Landscape) mode,
.J
(Twilight) mode or
~@:
(Fireworks)
mode is selected in the Scene Selection mode.
- Shooting movies
- Night Shot
- [Conversion Lens] is not set to [Off].
• When you use AF illuminator, the normal AF range finder frame is disabled and new AF range finder
frame is displayed by a dotted line. AF operates with priority on subjects located near the center of the
frame .
• The AF illuminator emits very bright light. Although there is no health hazard, do not look directly into
the AF illuminator emitter at close range.
Grid Line
With reference to the grid lines, you can easily set a subject in a horizontal/vertical position.
98
On
<#
Off
• The grid lines are not recorded.
Displays the grid lines.
_ _- . . _ ._._.__. . 1.- _._..
Does not display the grid lines.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents