Table of Contents
Advertisement
After successfully update, click "Search (F3)", choose the device and click "Browse
6)
(F4)". Then you may view the ip camera, like figure 5.
NOTE:
If you don't know how to fill out the content of "IP config", you could also tick the "Set
1)
IP automatically" to get the IP address from the router automatically.
2)
If you have the firewall software in your PC, when you run the HSearch_en.exe, it
may pop up a window to say "whether you want to block this program or not", then
you should choose not to block.
3)
The default ip address is 192.168.0.158 and default http port is 80.
H Series IP Camera User Manual –with Pan/Tilt of Mega pixels
Figure 4
Figure 5
8
Advertisement
Table of Contents
