System Setting Page; Device Information Checking - wireless guard NWIP-0M2 User Manual

5.5 System Setting Page

5.5.1 Device Information Checking


Device ID is set by factory. Every ID is unique
 Network Connection status will display "LAN" when connected by wired cable and
display "Wireless LAN" connected by wireless Router.
 SD status will remind if SD card inserted and display the free capacity. Click "Browse" to
view the contents in SD card and, "Format SD Card as fat32" to format SD Card and,
"Unplug SD Card" to stop the work of SD Card.
The device supports max 32G SD card. Please format the SD card to FAT32 before use the
card on Camera. Please check if the SD Card matches the camera or not before purchase
the SD Card.
H Series IP Camera User Manual –with Pan/Tilt of Mega pixels
Figure 27
20