1. Manuals
  2. Brands
  3. Magus Manuals
  4. DVR
  5. 21Series
  6. User manual

Magus 21Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

statement:
· We strive to ensure the exactness and integrality of the manual in the process of preparation, but
still errororomission is inevitable.
· The copy, transmission, plagiary, storage in retrieval system, or translation into any language
without written authorization is prohibited.
Page 1/78

Advertisement

Table of Contents
loading

Related Manuals for Magus 21Series

Summary of Contents for Magus 21Series

  • Page 1 statement: · We strive to ensure the exactness and integrality of the manual in the process of preparation, but still errororomission is inevitable. · The copy, transmission, plagiary, storage in retrieval system, or translation into any language without written authorization is prohibited. Page 1/78...

  • Page 2: Table Of Contents

    Content CHAPTER I MAJOR FUNCTION INTRODUCTION....................7 CHAPTER II NSTALL INSTRUCTION……………………………………………………………………………………………………..9 2.1 INSTALL HARD DISK……………………………………………………………………………………………………………..9 2.2 INSTALL DEVICE............................9 2.3 INTERFACE ON REAR PANEL........................10 CHAPTER III OPERATION NSTRUCTION……………………………………………………………………………….…………….12 3.1 MOUSE OPERATION...........................12 3.2 REMOTE CONTROLLER..........................13 3.3 ICON INSTRUCTION...........................15 CHAPTER IV BASIC OPERATION...........................17 4 MAIN MENU..............................17 4.1.1 TURN ON………………………………………………………………………………………………………………………18 4.1.2 LOGIN..............................18...
  • Page 3 4.3 RECORD CONTROL...........................20 4.3.1 START TIME / MOTION DETECTION / ALARM RECORDING..............21 4.3.2 START MANUAL RECORDING......................21 4.3.3 STOP RECORD............................21 4.4 RECORD SETTING（TIME RECORD）......................21 4.5 ENCODING SETTINGS..........................22 4.5.1 RECORD QUALITY..........................22 4.5.2 NETWORK TRANSMISSION IMAGE QUALITY..................23 4.5.3 AUODIO&VEDIO SWITCH........................23 4.5.4 MASK AREA SETTING................
  • Page 4 CHAPTER V MENU AND PARAMETER SETTINGS....................32 5.MAIN MENU..............................32 5.1 SYSTEM INFORMATION..........................32 5.1.1 HDD INFO............................33 5.1.2 BIT STREAM STATISTICS........................33 5.1.3 LOG INFORMATION..........................34 5.1.4 VERSION INFORMATION/UPGRADE SYSTEM..................35 5.1.5 ONLINE USER ............................36 5.2 SYSYTEM SETTING............................36 5.2.1 GENERAL SETTING..........................37 5.2.3 RECORD SETTING..........................38 5.2.4 PTZ SETTING............................39 5.2.5 NETWORK CONFIGURATION......................40 5.2.5.1 STATIC IP SETTING........................40 5.2.5.2 AUTOMATICALLY OBTAIN IP ADDRESS SETTINGS..............41...
  • Page 5 5.2.8 ALARM SETTING..........................46 5.2.9 VIDEO DETECTION..........................47 5.2.10 PTZ SETTING............................49 5.2.10.1 COMMUNICATION PROTOCOL.....................49 5.2.10.2 PRESET POINT SETTING....................50 5.2.10.3 CRUISE SETTING.........................50 5.2.11 OUTPUT MODE AND CHANGE CHANNEL'S NAME................50 5.2.12 RESTORE DEFAULT.........................51 5.3 ADVANCED..............................52 5.3.1 HDD MANAGE............................52 5.3.2 EXCEPTION HANDLING........................53 5.3.3 ALARM OUTPUT..........................54 5.3.4 VIDEO CONTROL..........................54 5.3.5 USER ACCOUNT..........................55 5.3.6 AUTO MAINTENANCE……………………………………………………………………………………………………..56...
  • Page 6 5.4.1 OPERATION BEFORE THE BACKUP....................59 5.4.2 NAMING RULE OF THE BACKUP FILE ………………………………………………………………………………...59 5.4.3 PARTITION FORMAT SUPPORT………………………………………………………………………………………..59 5.4.4 SUPPORTED BACKUP MEDIA………………………………………………….………………………………………..59 5.4.5 BY THE BACKUP TIME........................59 5.4.6 BACKUP BY SECTION…………………………………………………………..…………………………………………59 5.4.7 BACKUP FILE PLAY……………………………………………………………………………………………………..59 5.5 CLOSED SYSTEM……………………………………………………..…………………………………………………………..60 5.5.1 DEFAULT THE MENU USER…………………………………………………………………………...………………...60 5.5.2 TURN OFF THE MACHINE………………………………………………………………………………………………..60 5.5.3 REBOOT THE SYSTEM........................60 5.5.4 SWITCH USER……………………………………………………………………………………………………………..60...

  • Page 7: Chapter I Major Function Introduction

    Chapter I Major Function Introduction Support multi-language The basic system support Chinese, English, Dutch, Hungarian, French, Danish, Turkish, Italian, SPANISH, Czech, Portuguese, Russian, Korean, Indonesian, Vietnamese and so on. There will be other new language later. Optimized compression Compressed/decompressed in H264algorithm provide higher definition and stable network; Independent channel design;...
  • Page 8 Playback: Fast forward, fast rewind, pause, single frame, previous track, next track, track head, track end,mute; Fast forward: 1/2×,2×,4×,8×, 16×,32× slow forward 1/2×,1/4×； Anti-fake watermark Anti-fake watermark is available if required by client； P.T.Z. control Support multi-protocol decoder with RS485 bus; Support dome camera presetting positions, cruising, pattern ID setting and adjusting Alarm function Alarm input/ output without trigging point;...

  • Page 9: Chapter Ii Nstall Instruction

    Chapter II Installation Instruction 2.1 Install hard disk： This digital video recorder isn’t equipped with hard disk. Before install the digital video recorder, please prepare the hard disk. It can not work without the hard disk. Please choose the supplier recommended HDD, suitable for DVR working, to meet the time and capacity request.

  • Page 10: Interface On Rear Panel

    2.2.1DVR Front Panel DVR is a short form of Digital Video Recorder. 2.3 Interface on rear panel： Above picture is rear panel picture. Different model will be with different rear panel. 1. Video input Connect to video input device. Input signal should be PAL/NTSC BNC（1.0V P-P ，75Ω） 2.
  • Page 11 sound pick up device, it may has noise. We can take measure as below, Take sound pick up device with good direction. Adjust sound box volume，make it lower than noise range. Using absorb sound material in the environment，which can reduce sound reflect, improve the sound environment. Adjust the position of the sound pick up device and sound box, it can lower the noise.

  • Page 12: Chapter Iii Operation Nstruction

    to the GND. Prevent the high-voltage, install the cable in good position to prevent the ray. Input 120 Ω resistance to reduce reflect ,to make sure the good signal. DVR’ s 485 AB cable cannot connect to other 485 output device. Voltage between Decoder AB cable should be small than 5V。...

  • Page 13: Mouse Operation

    Chapter III Operation Instruction 3.1 Mouse operation Right click menu is shown as below: The list order will be different while controlled by cursor or by front panel. (Note: Right click to back to previous menu) Name Remark View 1 Detect one image on full screen View 4 Detect four image at the same time...

  • Page 14: Remote Controller

    Search Come to search interface, take other passage for reference. Record Come to record interface, with handle record,auto-record,stop record Alarm out Select Alarm output model,auto,by hand, stop Main menu Come to Main menu 3.2 Remote controller Name Remark Check IP address Page 14/78...
  • Page 15 record recording manually interface Power Power on/Power off Switch with number ,character and other keys 10+ Numerical keys 10+ Numerical keys，for example,press10+ and 2,then come to 12. Numerical &character Numerical keys keys Record playback control area keyboard layout: Play, pause, FF and FR on front panel, previous/next track, first/last track Backup Backup menu exit...

  • Page 16: Icon Instruction

    Image will switch to 1/4/9/16 screen in cycle on spot;image switch normal / full screen display on Multi image playback status. On PTZ switch control spot image status, to start PTZ control buttons; when on playback status, PTZ switch control start the AB Cut function On spot image status, clear the alarm port, returned to normal;...

  • Page 17: Chapter Iv Basic Operation

    CHAPTER IV BASIC OPERATION Main Menu 4.1 SYSTEM LOGIN Page 17/78...

  • Page 18: Turn On

    After power on, click the left mouse button or press the enter key, user input user name and password. Remark: there are 3 original user name: admin、88888888、66666666.The password is the same as user name. Admin,88888888 is a high privilege user, and 66666666 is lower power user which only can monitoring, playback, backup and others 4.1.1 Turn on Check whether the current and voltage of power supply accord with the digital video recorder before turning it on.

  • Page 19: Logout

    Press the Power key on front panel to turn off there coder. There coder shouldn’t turned off in backup process; otherwise the backup recording will be lost. Prompt: Cut off the power supply of recorder first and then turn off the peripheral devices. If you won’t use the recorder for long time, remove the power cord from outlet 4.1.4 Logout Cancellation is logged out of the current account，logout the account to protect your operation.

  • Page 20: Record Configuration

    4.2.1 Time adjust Main menu—system setting—general setting.Save and go to former menu automatically. If it is inrecording state, the status bar will indicate the state and the settings won’t take effect. Please stop record and then adjust time if it didn’t take effect.china TV format is pal,other country’s format pls take local tv format for reference. 4.2.2 Record configuration：...

  • Page 21: Start Time / Motion Detection / Alarm Recording

    Click the right mouse button select manual recording, or enter the main menu - Advanced Options - video control Marked by the icon, choose manual or automatic video recording, round black spots in the middle, it means that the channel accepts the user selection.

  • Page 22: Encoding Settings

    The second step: pre-recorded time up to 60 seconds; The third step :support 6 period of time recording in each channel, using the number keys or the mouse input. The fourth step: Working days can be customized, the default is Monday to Friday, users free to modify according to requirement; The fifth step :After setting, the graphic appears below the regular work table, as s hown in the dark part of it;...

  • Page 23: Network Transmission Image Quality

    control measures, limited stream way, more stable stream, image will be better, but not good to save hard disk space. It can change stream mode, the main eature is when there is the standstill image, the bit stream is small, taking up minimal hard drive space, when moving objects in the camera or the picture quality is poor, bit stream, will be large.

  • Page 24: Time Logo Location

    4.5.5 Time logo location Time location in the video channels only effective for record, on-site monitoring location has nothing to do with this position; Select Monitor, click Settings, drag the title frame can be placed in an ideal position is ok. 4.6 Record search/ playback / Cut / Backup Enter the main menu to search the record Page 24/78...
  • Page 25 Click here to check video information each list Video Listing Area for play or backup of one or several Time input pop-up. Click Clock Button, Time information popping year of the chosen video calendar; Click during above video hour-minute-second Simultaneous play channels listing area button input...

  • Page 26: Search According To Time

    4.6.1 Search according to time Step One: Input date and time at left corner or click the clock icon and pop-up calendar then select the target record date and time. Step two: select record type and channel. Drop-down triangle button to select idea record type, and if not sure ,we select all. Step three: Select quantity of simultaneously playback channel and channel number.
  • Page 27 slide to check . Select the desired record file, double click the left mouse button to start playing the selected one or more video files. playback mode There are two selectable mode ,Four-channel or full channel . Select the "four channel" mode, the user need to playback with one chan or multi-chan;...

  • Page 28: Alarm Imput/Output Setting

    Stepfour: Selectthe file in “channel” Stepfive: Press “condition backup” 4.7 Alarm imput/output setting Menu：main menu----system setting---alarm setting Alarm Input: input serial number, 1,2,3, ... 16 digits on device backplane Device Type: refers to the conditon of alarm output port, normally are turn on or turn off . the normal state is turn on, set as NC Video channels: an alarm port can trigger one or more channels for simultaneous recording, according to the requirement to click the corresponding box.

  • Page 29: Ptz Control

    Buzzer: The external device port receives an alarm signal , whether built-in buzzer sounds. Alarm upload: set alarm when an alarm is received on the port network operation, one of the action plan to complete networks alarm, when the unit has the correct network connection to a fixed format to the center through the network port IP (central server) to TCP / IP protocol, the issue of specific alarm information packet or video data stream, the central server can be decoded to achieve the alarm center front of the scene in time to receive information.

  • Page 30: Ptz Manual Control

    【Baud Rate】Chose the camera’s baud rate, can control the channel’s PTZ, the default is 2400. 【Data bits】default as 8 【Stop bit】default as 1 【adjust】 no 4.8.1 PTZ manual control Click right mouse to control ptz or camera as below picture, press button to control. Speed：Ptz trun around spped，select the suitable speed of the PTZ，there are 1 to 9 degree ,1 is slwest ,9 is fastest .asthe ptz protocol is different,the same number donot means the same speed.

  • Page 31: Manual Cruise

    click：click preset point,camera direct to preset position. 4.8.3 Manual cruise select cruise code click to start cruise,camera begin to cruise auotomatically. 4.8.4 Auxiliary lights PTZ control interface switch according to each page and turn on& turn off. Page 31/78...

  • Page 32: Chapter V Menu And Parameter Settings

    CHAPTER V MENU AND PARAMETER SETTINGS 5.Main Menu 5.1 System Information Page 32/78...

  • Page 33: Hdd Info

    5.1.1 HDD INFO Capacity：it will show total capacity of the HDD,DVRW wonot show any capacity. free capacity：The spare capacity of the HDD,it will show the uncover space after covered one time. start time： the earlyest recording time of HDD, format is ××××/××/×× ××：...

  • Page 34: Log Information

    show the stream status of each channel when stream work as 0, it means the channel does not start recording; 5.1.3 Log information record of all operation on DVR, easy to check working conditions on dvr.The record can search and back up. Page 34/78...

  • Page 35: Version Information/Upgrade System

    5.1.4 Version information/upgrade system DVR system and main parts ‘s technical ID information USB flash and internetcan upgrade device software. Note: incorrect upgrade may make the DVR cannot use, and have to send back to factory to repair, please take care of that. Recorder type: the machine model.

  • Page 36: Online User

    dynamic WAN IP address assigned. MAC address of the local network chip factory MAC address, MAC address of each network device is completely different. Serial Number: The device software license key. Upgrade the system: The system supports USB devices to upgrade the system software and network upgrade mode. Upgrade risk, in the professional guidance.

  • Page 37: General Setting

    5.2.1 General setting System Time: input format :year ,month ,hours,minutes ,seconds ,in sequence . Date format and separator: video overlay used when the time format, according to the habits and preferences options. Time format: 12-hour and 24-hour, timed to influence the choice of standard video settings, select the appropriate mode. Language: Support for more than 16 kinds languages, ordinary factory-built models for the Simplified Chinese language, English, other languages to support them when they need to order instructions, free of charge before ordering, purchase, please contact the vendor.

  • Page 38: Record Setting

    Encoding settings See Chapter 4.5 describes VCR video clarity, resolution, audio, capture, time of position, the channel position, covered privacy area, network effects and other parameters set Channel number: camera sequence number. Coding modes: encoding algorithm, you can generally use the default. Expansion flow: data for network transmission.

  • Page 39: Ptz Setting

    Pre-recorded: data buffer length of video recorder , the function needs to store temporary data on the hard drive, read and write frequently, larger hard disk is damaged, if not necessary, donot set it. 5.2.4 PTZ setting See Chapter 4.4 describes PTZ communication port parameter settings.

  • Page 40: Network Configuration

    5.2.5 Network Configuration The machine is with RJ45 network port, with protocol TCP/IP, DHCP; you can connect it with computer. Embed in IP88,3322 mobile domain analysis function, it suitablefor static IP and DHCP. IP Config Available modes to get IP: Auto and Static. DHCP protocol is used to get IP automatically.

  • Page 41: Automatically Obtain Ip Address Settings

    accesses network in PPPOE protocol. If this IP address is bound to S/N and/or name of device, DNS server will analyze S/N and/ornameofdeviceto the IPaddress. Inputthe IPaddress ofdomainserverin “DNS address” 5.2.5.2 Automatically obtain IP address settings （higher setting） Before the box can be selected in the DHCP，if requires DHCP server, routers generally have this feature, open is ok. 5.2.5.3 Alarm Center Server Settings The structure of the network equipment, use for remote management computer IP address.

  • Page 42: Ddns Set And Support Dynamic Domain Name Resolution Protocol

    5.2.5.5 DDNS set and support dynamic domain name resolution protocol Dynamic DNS. It Is the user's dynamic IP address mapped to a fixed domain name resolution services, each time a user connect to the network, the client program will pass through the information to the host's dynamic IP address and sent to service providers located host server program.
  • Page 43 (5-3) 3.An installation CD-ROM comes with the CMS client software, when installation completed, showed below icon on the desktop. Page 43/78...
  • Page 44 4.Open CMS software, click Single-ID to fill out the NAT ID and the Password is factory default 88888888 . 5.Fill correct Nat ID and then Login into the CMS interface, it will connect the DVR automatically .When connection success, it will display the blue flag on the upper-right corner.
  • Page 45 into the player window, when play successfully ,it shows the stream and channel number at the same time. Note：When the image dropped frames or work slow, please check whether the network bandwidth is enough. Or please use local area network to test whether the image dropped frames.（if the image work smoothly in local area network ,it will be the network problem.） Page 45/78...

  • Page 46: Email Setting

    5.2.5.6 Email setting Set up to receive e-mail alert picture, supports SMTP format, does not support encrypted authentication 5.2.5.7 Automatic time adjust / NTP Setting time Automatic adjust setting, need to know the host IP or domain name, input to the host region. Time Zone: According to the standard time difference, select the appropriate time zone;...

  • Page 47: Video Detection

    Alarm Input: Alarm input serial number, 1,2,3, ... 16 digits on device backplane. Device Type: alarm input interface of the device can be normally open, normally closed also, according to the requirement to set external alarm device , the normal state of the external device is normally open, chose NO. Video channels: an alarm port can trigger one or more channels for simultaneous recording, according to the requirement to click the corresponding box.
  • Page 48 Video Loss: the absence of video images. Camera damage or completely covered will result in video loss. Occlusion detection: When the image blur, block area identified by standards, are to determine the camera is blocked. Dynamic testing: activities within the image on the monitor screen of intelligent analysis, the sensitivity adjustment on the monitor screen through the activities of the perception of intensity agility, the higher the sensitivity setting, a small screen activities, such as leaves, time will trigger the motion detection switch.

  • Page 49: Ptz Setting

    non-blind effect. Video delay: Even if the video test conditions disappear, and will continue to set the recording time. Alarm output:when video detection are met the condition, the device backplane linkage alarm switch output port, when chosed, while port switch will change the turne on to turn off or turn off to turn on . Output delay: After the alarm condition disappears, the output port to maintain the closed time.

  • Page 50: Preset Point Setting

    Data bits: RS485 communication formats, generally do not need to change, the default is 8; Stop bit: RS485 communication formats, generally do not need to change, the default is 1; Check: RS485 communication formats, generally do not need to change ,the default-is nothing.； 5.2.10.2 Preset point setting：...

  • Page 51: Restore Default

    Sets the relevant parameterswhen device signal output to the main screen. Transparency: the image transparent on the top of device interface menu . Channel name: named each camera, support Chinese names, Chinese Pinyin input method. Time Title:switch of time displayed or not. Channel Title: switch of Channel name is displayed or not .

  • Page 52: Advanced

    5.3 Advanced 5.3.1 HDD MANAGE Manage the HDD, such as HDD broken, HDD full, format HDD and delete the record. Page 52/78...

  • Page 53: Exception Handling

    Start time: the earliest time in current hard disk ,format is ××××/××/×× .××:××:××,cause not all channels are in the video status, ,some channels no video data is normal phenomenon. End time: the lastest time in the current hard drive ,format is ××××/××/×× ××:××:××, cause not all channels are in the video status, some channels no video information is normal.

  • Page 54: Alarm Output

    Event Type: support for non-hard drive, disk error, hard disk no space (hard disk is full), network disconnected, IP conflicts, unauthorized access, format does not match the video anomalies and other anomalies. Enabling switch: linkage moves the master switch, easy to open and close all joint functions. The following actions need to be selected as the solid box corresponds to take effect.

  • Page 55: User Account

    User account 5.3.5 User name and user group name of the character and length up to 6 bytes, the beginning and end space of character string are unuseful, the middle can have spaces. Valid characters: letters, numbers, underscores, minus sign, that we will not allow the use of other characters. Unlimited number of users and groups, the factory default preset ADMIN Administrator group, opened all the permissions.

  • Page 56: Auto Maintenance

    Increase user: add users and set user group permissions control. There are four user when device leave the factory, user management group has two ,ADMIN and 88888888.the password is 88888888 , with all authority; a user group password is 66666666 66666666 , only part of the authority; this user a special user DEFAULT internal use for the system can not be deleted.

  • Page 57: Tv Adjustment

    5.3.7 TV adjustment Adjust the screen image position, to achieve the image area in the middle position of the display with the suitable size. . By adjusting the upper and lower left and right borders to realize. Page 57/78...

  • Page 58: Video Matrix

    5.3.8 Video Matrix 5.3.9 Card number superposition and special data Special model features, such as ATM-specific recorders. Through the RS232 port or network interface to get a bunch of external data, superimposed on the video, can communicate with ATM cash machines ,superimposed on the video card, enter the card number to retrieve the video information;...

  • Page 59: Operation Before The Backup

    5.4.1 operation before the backup : Confirm the U disk or USB device and port in the normal state; detection set size can be seen Unformatted or device has file to clear, choose formatting, all formatting the device, this action will result in loss of the original data; Detected by the device displays the information box in the storage device, the available space, type and other related information;...

  • Page 60: Closed System

    Vendors provide professional software to play, and search, drag strips with a variety of ways; Support STORM image decoding format , a similar storm of third-party software to play back images, but the time information, the sound may not be correct； 5.5 Closed system 5.5.1 default the menu user Exit the menu, the next time to re-enter the menu need a password.
  • Page 61 Select “NETWORK” option in the System main menu, when you get into the page that showed in the follow icon, Pls set your ip, Subnet mask, Gateway and DNS, saved and exit. For Example, the co nfig should be seted as the follow icon. he IP must be seted within the router ‘s network segment) Page 61/78...
  • Page 62 Select “Port Config” option to get into set interface ,the four ports that showed in the follow icon ,except “HTTP PORT” should be modi fied (e.g. update the http port’s value 80 to 8080.8000.2010,) the other ports must use as it defaulted. After amended pls save and Page 62/78...
  • Page 63 exit. Enter into router, make sure the ports seted mapping to the abov e ports , Furthermore , you need to add a new port and set the port s “ 3356”( the fifth port as below picture ) , then start all of them. Enter into router’s DDNS service config option, login into DDNS, click the button t o start.
  • Page 64 DDNS’s user name, you should go to free of charges DDNS website to apply a domain e.g., in the following picture, set Host Name as oaby.com and set User Name Set as longsetest, and set Password as ********, then click the “apply” button Page 64/78...
  • Page 65 Select ” Internet Explorer” icon in your desktop, right click mouse, select “attribute” option, then alert “Internet Attribute “ Dialog, click “safe”option,then click “customize safe level” to open safe comfit set all the “ActiveX controller and plug-in” related option as open ,click “Enable” as the follow icon( Note : The DVR can run in to following System,e.g.
  • Page 66 Input http://oaby.com:8000/ into IE and press Enter,You need to install this plug-in in your system,Pls select allowed plug-in that suit your System, later the System will enter into login page, it is shown as the follow picture. Note: if DDNS’s Domain can not view System page,in order to validate if DDNS as running,you can input static ip address that you seted in current DVR, Eg: http://192.168.1.150:8000/ and press Enter.the following operation is the same as this .
  • Page 67 ： There is an additional operation striation for about how to use client software to visit Dvr, Note: If you can not connect to the internet, in order to validate if there is quality problems with the DVR, Pls make sure you must strictly follow the above steps .if there is some problem, pls check up your config carefully 6.10 If i.e.
  • Page 68 1.If the ping command results shows internet is not connected,pls check up internet lines, change cross connection line and direct connection line, then retry 2. If this ip address: 192.168.1.150 is forbidden to use by router, pls modify the ip address. Page 68/78...

  • Page 69: Chapter Ⅶ Instructions For Mobile Phone Monitoring

    Chapter Ⅶ Instructions for Mobile phone Monitoring 一、Installation for “zmeye plus” Ⅰ.Open “ ”on iPhone, as shown in the following Picture 1： Page 69/78...
  • Page 70 Picture 1 Ⅱ.Click“ ”，input “zmeye plus” in the search box ，then click“ ” as shown in the following Picture 2 Page 70/78...
  • Page 71 Picture 2 Ⅲ. As shown in the following Picture 3 Picture 3 Page 71/78...
  • Page 72 Ⅳ.Chick “ ” on Picture 4 ， Next will ” on pictureⅢ, then it will appear as shown in the Picture 4， chick “ appear as shown in the Picture 5， in the Picture 5 , iput your Account no and Passward,then click“ ”，...
  • Page 73 Picture 6 Page 73/78...
  • Page 74 Ⅴ． In the Picture 6 ， when“ ” ， The status indicate that “zmeye plus”software is in ”turn infto “ downloading and will install automatically ， the installation successfully completed when“ ”the progress bar show as “ ”. Ⅵ． When the Installation is completed, the iphone interface display “zmeye plus” icon, As shown in the following Picture 7 Page 74/78...

  • Page 75: Introduction For How To Use " Zmeye Plus

    Picture 7 2.Introduction for how to use “ zmeye plus “ Ⅰ、Click “ zmeye plus“icon to open the soft ware ，the Interface function keys are described as below,As shown in the following Page 75/78...
  • Page 76 Picture 8 Picture 8 ①PTZ direction control key (up/ down/ left / right ) Page 76/78...
  • Page 77 ②PTZ Camera control (zoom in , Zoom Out ),( focus increase focus decrease ),( Aperture increase Aperture decreases ③Select the Monitoring channel ④Button functions from left to right: Pause, snapshot, full screen mode, choose the next Group monitoring and monitoring connection settings ⑤Exit, the button on the middle of iphone .
  • Page 78 Picture 9 ①Monitory point IP address .（xiong.3322.org） ②Port Forwarding (3357) ③User name (admin) ④Passward (88888888) Page 78/78...

Table of Contents