Installation Steps - Absolute AVH-9000NAV User Manual

INSTALLATION TEPS
1. Remove the chassis from Slide Bracket Housing
)
1 Press the REL button to release the control panel
)
2 Hold the right side of the control panel to pull it upwards a little and then to you
for r emov ing it ;
3) Remove the PLASTIC FRAME from the chassis (see the Installation diagram);
4) Insert the 2 KEY PLATES into the grooves at the both sides of the chassis till
they click(see the Installation diagram);
5) Pulling the two KEY PLATES to remove the chassis from the
Housing ;
2. Mount the liding S
bend some tabs of liding
3 . Connecting all wires
1) Connecting all wires
S
REL button
1
Bracket H ousing in the position of car multi-media system and
S Bracket H
:
according ot the wiring diagram on
;
;
2
ousing to fix . it
- - 3
Slide Bracket
next page;