Same Functions In Any Work Source Mode - Absolute AVH-9000NAV User Manual

Same functions in any work source mode

1. POWER button
In power off mode, pressing POWER button
control panel powers on main unit.
In power on mode, long pressing POWER button on control panel or on remote control powers off
main unit.
2. VOL knob & VOL+/VOL- buttons
T o adjust volume level, rotate VOL knob on control panel or press or hold VOL+ or VOL- button
on remote control.
3. SEL button
To switch between TRE
and VOLUME , briefly and repeatedly press SEL button.
After switching on the desired mode above, rotate VOL knob or press VOL+/VOL- buttons to set it.
To switch between BT, LOUD,
MONO(in radio mode), CLOCK FORMAT
press SEL button to switch on BT, then briefly and repeatedly press SEL button.
After switching on the desired mode
4. MUTE button
To switch MUTE mode on or off, press MUTE butto
control panel .
5. EQ button
To select a desired preset
button on remote control continuously.
6. To switch LOUD mode
To switch LOUD mode between LOW, MIDDLE, HIGH and OFF
7. SW button
To switch SWF FREQ between 80HZ, 120HZ and 160HZ
8 . CLK button
P ress CLK button on remote control to display clock time .
9. OPEN and buttons
To slide the monitor out and stand it up or into the monitor slot, press OPEN button on control panel
or press button on remote control;
10. button
To adjust the angle of the monitor,
11. MODE button and source menu
To switch work source between RADIO, DISC(after inserting a disc), USB(after inserting a USB
storage), CARD(after inserting a card),
control or press MODE button on control panel continuously.
During disc (non-CD)
touch the icon in the
entering Disc/USB/Card mode(refer to Disc/USB/Card Operation)
During AUX or TV playback, t
icon to enter the display status of
operation and TV operation)
,
In radio BT music
source menu before entering radio BT music or CD mode(refer to Radio Operation, BT Operation
and Disc/USB/Card Operation)
BLE ,BASS,BAL
SWF VOL SWF FREQ,
above
EQ mode from JAZZ, CLASSIC, POP, ROCK and USER, press EQ
long
TV
/USB/card playback,
Function Icons-board
ouch screen to pop up
the source menu
.
or CD mode, t ouch RADIO, BT
,
.
on remote control or
ANCE, FAD R E ,COLOR,BRIGHTNESS,CONTRAST, TINT
, EQ , DX/LOCAL(in radio mode), STEREO/
, CLOCK, BUZZER FREQ AREA and ,
, rotate VOL knob or press VOL+/VOL- buttons to set it.
n on remote control or
, long press SW button on remote control.
press button on remote control
, AUX IN and BT MUSIC, p
touch screen to pop up
to enter the display status of
AUX or TV interface
before entering AUX or TV mode(refer to AUX
or DISC icon to enter
-1 - 0
press ing POWER button on
TV SYSTEM,
press MUTE button on
, long press LOUD button.
or on control panel
ress MODE button on remote
Function Icons-board
the source menu
.
and then t ouch
the display status of the
long
.
and then
before
AUX or TV