Denon DHT-T110 Owner's Manual page 8

E
N
G
L
Disable Your Television's Speakers
I
Disable your television's built-in speakers when using DHT-T110. Usually, this is accomplished via an on-screen setup menu on
S
your television. Look for an "Audio" or "Sound" sub-menu, and a "Speakers Off", "Disable Speakers", "External Speakers" or
H
similar menu item. Some televisions have a switch on the rear panel to disable the built-in speakers. If your television does not
have these functions, lower the volume of the television all the way down to 0, or mute the television.
The DHT-T110 Remote Control
A remote control is supplied with DHT-T110. Its keys duplicate DHT-T110's front-panel buttons (see "The Controls on Top of
DHT-T110" on page 13), with one addition (Day/Night), and one deletion (the "Learn" key).
Selects TV audio input
Note: Don't forget to insert
the included battery into your
remote control.
12
Don't leave the television speakers on so that both systems play simultaneously;
this will not yield sound that is louder or "better. "
Volume up
Volume down
Mute
10º
CR2025
power on/standby
Selects the Bluetooth® wireless audio input
Selects the Listening Mode
Day/Night; toggles Night Mode
on and off (see "Listening
Modes" on page 14).
Remember, you can use your television
or cable/satellite-box remote
to operate DHT-T110;
see "Use Any Remote to Control your DHT-T110"
on page 16.