Brookstone 595272 User Manual

better by brookstone
We believe that exacting standards are the
Projection core of our success. this product has been
thoroughly tested to be certain it meets
Clock
our rigorous quality control criteria.
Go ahead. stay in bed. With our projection
clock, you can see the time without even
lifting your head. easily project the time,
date, day of the week and indoor
temperature on your wall or ceiling
with the touch of a button.
Battery precautions
• Dispose of the old batteries properly.
Do not dispose of the old batteries
in a fire.
• Do not leave the batteries where a child
or pet could play with or swallow them.
If the batteries are swallowed, contact a
physician immediately.
• the batteries may explode if mistreated.
Do not attempt to recharge or
disassemble the batteries.
• Use only fresh batteries of the required
size and type. Do not mix old and
new batteries, different types of
batteries, or rechargeable batteries
of different capacities.
® location of controls
1. tIMe/ALArM/CALenDAr/
teMP LCD DIsPLAy
2. ALArM stoP/LIGHt/
snooZe bUtton
3. Hr (HoUr)/MontH bUtton
4. MIn (MInUte)/DAte bUtton
5. 12Hr/24Hr/yeAr bUtton
6. ˚C/˚F bUtton
7. ProjeCtor
8. ProjeCtor FoCUs
9. snooZe/ALArM on/
ALArM oFF sWItCH
10. CALenDAr/tIMe set/
ALArM set/LoCk
11. externAL ADAPter
12. ALWAys brIGHt
on/oFF sWItCH
1
7
8
LEFT SIDE
11 12
battery installation
slide and open the battery compartment
on the rear of the unit. Insert 3 AA
2
batteries—noting the polarity indicators.
IMPORTANT: Batteries must be installed
3
to operate clock.
4
to set calendar
5
slide switch to CALenDAr. Press MontH,
DAte or yeAr buttons and set to the
6
current date.
to set time
slide switch to tIMe set. Press Hr or MIn
button to set current time.
9
to set alarm
• slide switch to ALM set position, the AL
icon will appear on the display. Press Hr
10
or MIn buttons to set alarm time.
• slide switch to ALArM on position.
will appear on the time display.
RIGHT SIDE
the alarm function is activated.
• slide switch to snooZe position to
activate the snooze Alarm.
lock function
After you set time and alarm time, slide
to the LoCk position to protect against
inadvertent changes caused by accidental
touching of the buttons.
using the snooze alarm
slide to the snooZe position, the sign Zz
will appear on the display. the snooZe
function is activated. once the alarm starts
to ring, you can activate the snooze by
pressing the snooZe/LIGHt button. the
alarm will stop for 5 minutes, and resume
ringing after 5 minutes.
to completely stop the alarm, slide the
ALArM sWItCH to the oFF position.
Alarm duration—1 minute.