Brookstone “Bob” Instruction Manual

SAVE THESE INSTRUCTIONS
LOCATION OF CONTROLS
1. Up
"Bob"
2. Mode
5-in-1 Clock 3. Down
4. Set
5. Clock Bottom
changes color &
6. Reset
functIon wIth a push
7. Battery Compartment Cover
8. Mode Lock On/Off
1
2
3
5
6
7
8
CLOCK OPERATION
InsertIng the BatterIes
1. Turn the CLOCK BOTTOM
counterclockwise and remove.
2. Remove the BATTERY
COMPARTMENT COVER.
3. Insert three AAA batteries (not
included) according to polarity
indicators inside the compartment.
4. Replace the BATTERY
COMPARTMENT COVER.
4 5. Replace the CLOCK BOTTOM
and turn it clockwise to tighten.

settIng the tIme

1. Remove the CLOCK BOTTOM
and slide MODE LOCK ON/OFF
to the "On" position.
2. Press MODE until the Time
screen displays. The blue
LED backlight illuminates for
approximately four seconds.
3. Press and hold SET. The hour
blinks on the display.
4. Press or incrementally until
the correct hour displays. Or press
and hold or to move at a
faster rate.
5. Press SET again. The minutes
blink on the display.
6. Press or incrementally until
the correct minutes display.
Or press and hold or to
move at a faster rate.
7. Press SET again to save your 8. Press
time selection.
until the correct day displays.
Or press and hold
selectIng 12- or
move at a faster rate.
24-hour mode
9. Press SET again to save your
While in the Time screen, press
date selection. The arrow at the
or to select either 12- or 24-hour
bottom of the display points to the
mode. If 12-hour mode is selected,
corresponding day of the week.
PM displays for the afternoon/evening

settIng the alarm tIme

hours. AM does not display for the
morning hours.
1. Remove the CLOCK BOTTOM
and slide MODE LOCK ON/OFF
settIng the date
to the "On" position.
1. Remove the CLOCK BOTTOM
2. Press MODE until the Alarm
and slide MODE LOCK ON/OFF
screen displays. The purple
to the "On" position.
LED backlight illuminates for
2. Press MODE until the Date
approximately four seconds.
screen displays. The orange
3. Press and hold SET. The hour
LED backlight illuminates for
blinks on the display.
approximately four seconds.
indicating the alarm function is on.
3. Press and hold SET until the year
4. Press
starts blinking on the display.
the correct hour displays.
4. Press or incrementally until
Or press and hold
the correct year displays.
move at a faster rate.
Or press and hold or to
5. Press SET again. The minutes
move at a faster rate.
blink on the display.
5. Press SET again. The month
6. Press
blinks on the display.
until the correct minutes display.
6. Press or incrementally
Or press and hold
until the correct month displays.
move at a faster rate.
Or press and hold or to
7. Press SET again to save your
move at a faster rate.
wake time.
7. Press SET again. The day blinks
on the display.
or incrementally
or to
Find thousands more
great ideas online
appears
or incrementally until
or to
or incrementally
or to
740687
Brookstone.com | 1-800-846-3000
1 Innovation Way, Merrimack, NH 03054