Installing It On A Desk Or Table; Mounting On A Tripod (Sold Separately); Install With Mounting Screws (Sold Separately) - Hitachi VZ-HD4000A User Manual

 Installing it on a Desk
or Table
Install it in a stable location where it
is unlikely to fall off.
 Mounting on a Tripod
(Sold Separately)
Attach the tripod to the tripod
mounting hole on the base of the
camera.
Tighten the screw securely by hand.
Tripod mounting hole
Standard size of usable
tripod mounting screw
=4.5 mm ± 0.2 mm
Caution
Set up the tripod according to its
user's manual so it is steady and
will not fall over.
 Install with Mounting
Install mounting screws in the four
screw mounting holes on the base.
Tighten the 4 screws securely.
Standard size of mounting
-20UNC
screws
Warning
Do not mount the camera using
the tripod screw when installing it
in a high place.
Screws
(Sold Separately)
Screw mounting holes
Rubber foot on base of camera
= 3 mm to 4 mm
M3 screw
19