Related Manuals for Lindy 42953
Summary of Contents for Lindy 42953
- Page 1 USB 2.0 Link Cable User Manual English LINDY No. 42953 www.lindy.com © LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (June 2005)
-
Page 2: Table Of Contents
Introduction----------------------------------------------------------------------------------2 Package Contents-------------------------------------------------------------------------2 Product Features--------------------------------------------------------------------------2 System Requirements-------------------------------------------------------------------2 Driver Installation (PC to PC File Transfer) ---------------------------------3 ® Windows 98 Driver Installation---------------------------------------------------3 ® Windows 98 Driver Un-Installation----------------------------------------------5 ® Windows ME Driver Installation--------------------------------------------------6 ® Windows ME Driver Un-Installation---------------------------------------------8 ® Windows 2000 Driver Installation------------------------------------------------9 ®... -
Page 3: Introduction
1. Introduction Congratulations on your purchase of the LINDY USB 2.0 Link cable. This unique cable allows you to easily connect two computers via a USB port and instantly transfer files at great speed. The USB 2.0 Link cable is your fast solution for peer-to-peer file transfer between two computers via the USB port. -
Page 4: Driver Installation (Pc To Pc File Transfer)
5.1.1 Power on both computers and make sure the USB port is enabled and working properly. Insert the CD in to your CD-Rom drive. 5.1.2 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” (D: represents CD-ROM) and double click on “Setup.exe”... - Page 5 5.1.5 Once the installation is complete, a new icon called “SuperLink” will appear on your desktop. 5.1.6 Plug the USB 2.0 Link cable into an available USB Port on the PC, the pc will detect and install a new item “USB SuperLink Adapter” within “Universal Serial Bus controllers”...
-
Page 6: Windows ® 98 Driver Un-Installation
Attention: Before you go through the un-installation procedure, please make sure that the USB 2.0 Link cable has been unplugged from the PC. 5.2.1 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” and double click on “Setup.exe”. 5.2.3 Select “Only remove USB Link Adapter driver”, then click “Next” to continue. -
Page 7: Windows ® Me Driver Installation
5.3.1 Power on both computers and make sure the USB port is enabled and working properly. Insert the CD in to your CD-Rom drive. 5.3.2 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” (D: represents CD-ROM) and double click on “Setup.exe”... - Page 8 5.3.5 Once the installation is complete, a new icon called “SuperLink” will appear on your desktop. 5.3.6 Plug the USB 2.0 Link cable into an available USB Port on the PC, the pc will detect and install a new item “USB SuperLink Adapter” within “Universal Serial Bus controllers”...
-
Page 9: Windows ® Me Driver Un-Installation
Before you go through the un-installation procedure, please make sure that the USB 2.0 Link cable has been unplugged from the PC. 5.4.1 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” and double click on “Setup.exe”. 5.4.2 Select “Only remove USB Link Adapter driver”, then click “Next”... -
Page 10: Windows ® 2000 Driver Installation
5.5.1 Power on both computers and make sure the USB port is enabled and working properly. Insert the CD in to your CD-Rom drive. 5.5.2 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” (D: represents CD-ROM) and double click on “Setup.exe”... - Page 11 5.5.5 Once installation is complete, a new icon “SuperLink” will appear on your desktop. 5.5.6 Plug the USB 2.0 Link cable into an available USB Port, , the pc will detect and install a new item “USB SuperLink Adapter” within “Universal Serial Bus controllers”...
-
Page 12: Windows ® 2000 Driver Un-Installation
Before you go through the un-installation procedure, please make sure that the USB 2.0 Link cable has been unplugged from the PC. 5.6.1 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” and double click on “Setup.exe”. 5.6.2 Select “Only remove USB Link Adapter driver”, then click “Next”... -
Page 13: Windows ® Xp Driver Installation
5.7.1 Power on both computers and make sure the USB port is enabled and working properly. Insert the CD in to your CD-Rom drive. 5.7.2 Select path of “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” (D: represents CD-ROM) and double click on “Setup.exe” to install driver. - Page 14 5.7.5 Click on “Finish” to complete this installation. 5.7.6 After installation is complete a new icon “SuperLink” will appear on your desktop. 5.7.7 Plug the USB 2.0 Link cable into PC’s USB Port, then “Found New Hardware Wizard” will help you to install driver. Select “Install the software automatically [Recommended]”...
- Page 15 ® 5.7.8 Windows will show a warning message as following, press “Continue Anyway” to go on this installation. 5.7.9 Click on “Finish” to complete this installation. 5.7.10 Plug the USB 2.0 Link cable into a USB Port, , the pc will detect and install a new item “USB SuperLink Adapter”...
-
Page 16: Windows ® Xp Driver Un-Installation
Before you go through the un-installation procedure, please make sure that the USB 2.0 Link cable has been unplugged from the PC. 5.8.1 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” and double click on “Setup.exe”. 5.8.2 Select “Only remove USB Link Adapter driver”, then click “Next”... -
Page 17: Running The Superlink Software (Pc To Pc File Transfer)
6. Running the SuperLink Application Program (PC to PC File Transfer) 6.1 Windows 98, ME, Windows 2000 & Windows XP Follow the steps below on how to run the SuperLink application program: The installation of the application is similar for all four operating systems. We have used Windows 6.1.1 Once PC#1 and PC#2 have finished installing the driver, connect each end of the USB 2.0 Link cable to PC#1 and PC#2. -
Page 18: Using Usb Networking (Ethernet Emulation)
98, Windows Installation Insert the CD in to your CD-Rom drive. Select the path “D:\DRIVER\ USB 2.0 LINK CABLE 42953\WINDOWS\Virtual Network_Install” (D: represents CD-ROM) and double click on “Setup.exe” to install the driver. Attention: Don’t plug the USB 2.0 Link cable into the PC’s USB Port until the driver has completed installing. -
Page 19: Faq
8. FAQ Q: What if the USB 2.0 Link cable can’t be successfully installed? A: This situation is common when your USB 2.0 port is a PCI card. If your USB 2.0 PCI Card uses a Microsoft driver then please download version 5.1.2600 (used with Windows 2000 &... -
Page 20: Fcc Statement
FCC Statement This device generates and uses radio frequency and may cause interference to radio and television reception if not installed and used properly. This has been tested and found to comply with the limits of a Class B computing device in accordance with the specifications in Part 15 of FCC Rules.