Charge The Battery - Kodak IM5 User Manual

IM5 Smartphone

Charge the battery

Fully charge the battery before using
your device for the first time.
1. Connect the USB cable that came
with your mobile phone to the
charger.
Note: Use only the cable and charger
supplied with the phone. Unapproved
equipment may cause damage to the
device or cause batteries to explode.
2. Connect the USB cable to the USB
port of the phone.
Be careful not to use excessive force
when plugging the USB cable.
Be aware of the correct orientation of
the plug. Damage can be caused by
attempting to insert the connector the
wrong way, which is not covered under
warranty.
Back to contents
Important Information about the Battery
If the battery has not been used for a long period of time, you may not be able to
power on your mobile phone immediately after you begin charging the battery.
Allow the battery to charge for a few minutes with the phone powered off before
attempting to power on the phone. The on-screen charge animation may not be
displayed during this period.
Using data services increases demand on the battery and will reduce the length of
time it can hold a charge.
The time required to charge the battery depends on the environmental temperature
and the age of the battery.
When the battery power level is low, the phone plays an alert and displays a
prompt. When the battery power is almost exhausted, your phone will power off
automatically.
5