Advertisement
User Manual
12. Use the supplied screws to secure both
sides of the drive
13. Carefully assemble the top and bottom of
the case. If the upper case does not fit
properly, adjust the hard disk position
and try again
14. Replace the 4 case screws and affix the
two foam feet as illustrated
15. Connect the Power Cable to the NAS
Enclosure and the mains power supply.
Now connect the Ethernet cable to the
NAS Enclosure and your PC using the
RJ45 ports
If you are intending to use the NAS
Enclosure using a direct connection to
your Mac Mini or PC then use the USB
cable to connect the Enclosure
4
English
Advertisement
