Table of Contents
Advertisement
5.1.2 Enter Password
To set or change your Ethernet Powerline Adaptor's password, click and select the Ethernet Powerline
Adaptor you wish to change from the list, then click on the "Enter Password" tab, the following screen
display.
Enter your Password (Take note to the password format) and click "OK" after setup.
Note:
The Ethernet Powerline Adaptor device must be present on the power line (plugged in) in order for
the password to be confirmed and added to the network. If the Ethernet Powerline Adaptor device
could not be located, a warning message will be shown.
Ethernet Powerline Adaptor
15
Advertisement
Table of Contents
