Table of Contents
Advertisement
2.3 Hardware Connection – Computer
For those computers you wish to be networked by Ethernet Powerline Adaptor, each of the computer
must be properly connected with an Ethernet Powerline Adaptor through an Ethernet (RJ-45) cable.
Following are the steps to properly connect the Ethernet Powerline Adaptor to your computer:
1.
Power off your PC or Notebook.
2.
Connect the provided Ethernet (RJ-45) cable to the Ethernet Powerline Adaptor's Ethernet port.
3.
Connect the other end of the Ethernet (RJ-45) cable to you computer's LAN port.
4.
Plug the Ethernet Powerline Adaptor into a wall socket next to the computer.
5.
Turn on your computer.
6.
Check and confirm that the Power and Ethernet LEDs on the Ethernet Powerline Adaptor are ON.
The hardware connection mechanism is shown below:
Ethernet Powerline Adaptor
7
Advertisement
Table of Contents
