Software Upgrade And Factory Reset; Software Upgrade; Factory Reset - AWA WF900i User Manual

11 Software upgrade and factory reset

11.1 Software upgrade

From time to time, Frontier Silicon may make software upgrades available with bug fixes and/or additional
features. You can either check manually, or set WF900i to check periodically automatically (this is the default). If
WF900i detects that newer software is available, it asks if you want to go ahead with an update. If you agree, the
new software is then downloaded and installed. After a software upgrade, all user settings are maintained.
CAUTION:
- Before starting a software upgrade, ensure that WF900i is plugged into a stable mains
power connection.
- Never interrupt the firmware upgrading before its completion.
- Never operate other functions before finishing the installation.
- Disconnecting power during a software update may permanently damage the unit.
To turn automatic checking on or off, select Menu > System settings > Software update > Auto-check setting.
REMARKS: It is optional for user to upgrade the software provided by Frontier Silicon
through internet. User should undertake the responsibility of any problem occurred by such
operations.

11.2 Factory reset

A factory reset resets all user settings to default values, so time/date, network configuration and presets are lost.
However, the radio's current software version is maintained, as is registration with the Internet radio portal.
Internet radio favourites therefore remain unless you re-register your radio with another account on the portal
website.
To perform a factory reset, select Menu > System settings > Factory reset Proceed > Yes.
WF900i- DAB+ Internet Radio with Docking for iPod/ iPhone
26