Advertisement
4
Move range close to cabinet
. cutout
Make electrical
connection.
See Electrical
reauirements
and Electrical
connection
sections, Panels A and 8,
for details.
Floor
Damage
Keep
shipping
base
under
range.
Failure
to do so could
touse
damage
lo floor
covering.
5
Remove and diicard
shipping
. base. Uft range up to cabinet
cutout using the oven opening
as an
area to grip.
Center range IntO coblnet
. cutout.
Loosen screws and
insert spacers (shipped In literature
bag), on each slde of control
console.
If range does not fit
properly. check spacers. The
spacers may need to be cut to fit
under countertop.
Mark wkh a
pencil where each spacer needs to
be cut. Loosen both screws to
remove spacers
Cut acros
top of
each spacer.
Reokxe
spacers and
tlehten screws. Check that range fits
property on countertop.
2!!J
&.J, 111
0
To reduce the risk of tipping the
appliance.
Me appliance
must
be securely tastened to the
cabinet
using the four screws
that are provided.
7
Secure range to cabinet
using
. four screws through the
mounting
holes in the front frame of
the oven.
I
8
Put air grille into place under
. oven door. Be sure lowers in air
grille point down, flange Is at bottom,
and mounting
holes are at top. Slide
air grille up Into positlon. Attach grille
wtth 3 black metal screws. (White
models may use chrome screws.)
9
Replace oven door by fitting
n
bath comers of door over
ends of hlnges. Push door evenly
and completely
onto hinges.
Remove nalb from hinges. ReInstall
two screws Into Inner door panel.
If
door does not close, you have not
pushed door completely
onto hinges.
IO,
- --
Turn on
power
SUPPlY.
11
Push ln'an
turn each
unit control knob to
'HI' oositlon.
Check
the operation
of the cooktop
elements and indicator
IiQhts.
12.
Check the operatbn
of the oven
elements.
Set the oven selector
control knob to 'BAKE'. (Oven
selector control knob Is not
avalbble
on all modeb.) Set the
oven temperature
control to 350°F.
The bottom element
should QIOW
red and the lndlcator
kght should be
on. The upper element should
became
hot but not glow red.
The oven lndlcator
light QOeS Off
n
Set the oven selector
and oven temperature
control knobs
to 'BROIL'. (Oven selector control
knob Ls not avallable
on all models.)
The top element
should glow red and
the lndlcatar
light should be on.
Advertisement
