Screen Cleaning Techniques; Additional; Product; Power - Outland Technology UWS-3310 Operating Instructions Manual

Screen Cleaning Techniques

1. Gently clean the screen with a clean camel hair lens brush, or a soft, clean,
lint-free cloth, to remove dust and other particles that can scratch the
screen.
2. Do not apply pressure to the screen surface when wiping it clean.
3. Do not pour or spray any liquid directly onto the screen or casing. Chemical
cleaners have been reported to damage the screen or case of the LCD
monitor.

Additional

Read all of these instructions and save them for later use.
Follow all warnings and instructions on the product.

1. Product

Do not block the vent holes in the case.
Do not insert sharp objects or spill liquid into the LCD monitor
through cabinet slots. They may cause accident fire, electric shock
or failure.
Disconnect the power plug from the AC outlet if you will not use it
for an extended period of time.
Do not attempt to service this product yourself, as opening or
removing covers may expose you to dangerous voltage points or
other risks.
Do not touch the screen directly with your fingers. You may
damage the screen, and oil from your skin is difficult to remove.
Do not apply pressure to screen. The LCD panel is very delicate.

2. Power

Use the type of power indicated on label.
3. Plugs
Do not remove any of the prongs of the monitor's three-pronged
power plug.
Disconnect the power plug from the AC outlet under following
conditions：
If you will not use it for an extended period time.
When the power cord or plug is damaged or frayed.
3