Related Manuals for HailBrain SafeGuard
Summary of Contents for HailBrain SafeGuard
- Page 1 SAFEGUARD SAFEGUARD TOTALGUARD TOTALGUARD ENGLISH USER’S GUIDE 20071 / 20070228 • SAFEGUARD / TOTALGUARD ALL RIGHTS RESERVED 2007...
-
Page 2: Table Of Contents
__________________________________________________________________________ 3.1.1 Using the Key Chain Remote Control _________________________________________________________________ 3.1.2 Registering the Key Chain Remote Control ____________________________________________________________ Comfort Remote Control SH624 (standard with TotalGuard, optional with SafeGuard) _____________________________ 3.2.1 Using the Comfort Remote Control __________________________________________________________________ 3.2.2 Registering the Comfort Remote... - Page 3 11.2 Activating the call-in function _____________________________________________________________________________ 11.3 Operating the alarm functions via an outside phone __________________________________________________________ 11.4 Operate lights and equipment via an outside phone __________________________________________________________ Changing the batteries ______________________________________________________________________________ Frequently asked questions__________________________________________________________________________ Tabels ________________________________________________________________________________________________ Technical data________________________________________________________________________________________ SAFEGUARD / TOTALGUARD...
-
Page 4: Safety Warnings
INTRODUCTION Introduction Thank you for purchasing this Haibrain security product. Haibrain security systems are made with care and are of the highest quality. Please read this user manual carefully and follow up all the instructions. In this user manual you will find texts marked with a ☺ sign. These texts contain extra information about the functions and can be skipped. -
Page 5: Basic Options
BASIC OPTIONS 1. Your Haibrain surveillance system The contents of your set: The Haibrain SafeGuard system is an effective security system for your home. In this kit you will find the following components: 1. Security console SC9000 2. Motion Detector MS90 3. -
Page 6: Important Properties
BASIC OPTIONS Haibrain TotalGuard-systeem The Haibrain TotalGuard system is identical to the SafeGuard system, but also contains components for prevention and comfort. The TotalGuard system also contains the following components: 1. Lamp/Dimmer Module LM12 2. Comfort Remote Control SH624 3. One extra DS90 Door/Window Sensor ☺... -
Page 7: Signal Range
(15) OFF - Switch off a Haibrain X-10 Module (see 7.7). (16) OK - Confirm setting. (17) Clear/bypass - Clear the setting, go up one level in the menu, Bypass function for switching of a sensor. (18) Built-in microphone. SAFEGUARD / TOTALGUARD... -
Page 8: Installing The Console
BASIC OPTIONS Display: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 1. Zone numbers Every sensor represents a so-called zone in the system. There are 30 zones for wireless sensors (numbers 1-30 on the display) and 2 zones for wired sensors (numbers 31 and 32 on the display). -
Page 9: Mounting The Security Console
PIN code (factory settings 0000, see 8.3) to remove the word ‘TAMPER’. The display will now read ‘DISARMED’ and you will hear a double tone to confirm. Then the text HOME CONTROL will be shown. SAFEGUARD / TOTALGUARD... -
Page 10: Choosing Your Language
BASIC OPTIONS 2.3.1 Choosing your language All menu items are displayed in English. You can choose any of the other available languages. You can do this as follows: To access the menu, press the menu or menu button. The display will now read ‘ENTER PIN’. E N T E R P I N Enter the 4-digit PIN code (factory setting 0000. -
Page 11: The Menu In English
Delay before the system calls out in case of an alarm (8.1). ANSWER DELAY Delay before the system picks up the phone when dialling in (8.1). 9. SET TIMER Submenu: NEW TIMER Setting a new timer (7.8). SAFEGUARD / TOTALGUARD... -
Page 12: Installing Remote Controls
BASIC OPTIONS 3. Installing remote controls 3.1 Key Chain Remote Control KR21 1. CONTROLE INDICATOR Lights up when the remote control transmits radio signals when pressing the buttons. If the indicator light is not very bright, the batteries should be replaced. 2. -
Page 13: Comfort Remote Control Sh624 (Standard With Totalguard, Optional With Safeguard)
BASIC OPTIONS 3.2 Comfort Remote Control SH624 (standard with TotalGuard, optional with SafeGuard, art. no. 09170) 1. PANIC With this red button the panic alarm can be activated immediately. 2. CONTROL INDICATOR Lights up when the remote control transmits radio signals when pressing the buttons. -
Page 14: Installing The Sensors
BASIC OPTIONS 4. Installing the sensors 4.1 Door/Window Sensor DS90 1. Transmitter part. 2. Magnet contact. 3. Control Indicator – Lights up when a signal is transmitted. 4. Screw for opening the sensor. 5. Switch for entry delays. 6. Connection for extra wired contact (9.4). 7. -
Page 15: Registering A Door/Window Sensor
MS90 at a height of about 180 cm from the floor and place it in such a way that the detector can cover the area you want to secure. The mounting bracket can be placed at an angle (90°) or directly against the wall. SAFEGUARD / TOTALGUARD... -
Page 16: Using The Motion Detector
BASIC OPTIONS 4.2.2 Using the Motion Detector 1. Open the battery compartment and insert the batteries (2x AA, alkaline). 2. Keep the TEST button (3) pressed for about 4 seconds. The LED will flash once. Release the button. The LED will flash twice. The motion detector has now chosen a unique code, which can be registered with your console. -
Page 17: Smoke Detector Sd10 /Sd90
6. Press CLEAR again to quit the menu. To confirm your choice, press 1 for Yes or 2 for No. If you choose Yes, you will quit the menu. If you choose No, you go back to the main menu. ☺ If you press CLEAR while entering the time, the time entered will be deleted. SAFEGUARD / TOTALGUARD... -
Page 18: Storing Phone Numbers
BASIC OPTIONS 5.2 Storing phone numbers The Haibrain SC9000 console is equipped with a telephone dialler. In the case of an alarm up to 6 telephone numbers can be dialled. All persons called will be able to listen to the message you have recorded (5.3). The message needs to be confirmed by the person answering the phone by pressing a 0 on their phone. -
Page 19: Using The Security System
Please note: Make sure the front door is closed when you switch on the device. Via the Comfort Remote Control SH624 Set the switch to SEC. Press the ARM AWAY button. The alarm is switched on instantly. SAFEGUARD / TOTALGUARD... -
Page 20: Panic Alarm
BASIC OPTIONS Switching on the ARM HOME function A R M E D H O M E Via the console Press the ARM HOME button on the console. The alarm is switched on instantly. Via the Key Chain Remote Control KR21 You cannot switch on the ARM HOME function with your remote control. -
Page 21: What Happens When The Alarm Goes Off
The zone indicator of the sensor concerned will now flash quickly. If there are more sensors causing problems, the information on the next sensor will be displayed. The bypass is valid until you switch off the alarm (Disarm). SAFEGUARD / TOTALGUARD... -
Page 22: Prevention And Comfort - 'Home Automation
Every lamp controlled by the system needs to be equipped with a Haibrain X-10 module. The LM12 Lamp/Dimmer Module from the TotalGuard set is such a module (optional for the SafeGuard, art. no. is country specific, see www.Haibrain.com/plug-in). These modules are easy to install (Plug & Play) and are also available separately, which means you can expand the system as you wish. -
Page 23: Addressing Your Modules
(via the number pad on your console or with the SH624 Comfort Remote Control). 7.3 Installing the LM12 Lamp/Dimmer Module (standard for TotalGuard, optional for SafeGuard) 1. HOUSECODE SWITCH To set up the system address. Leave the switch set to A. -
Page 24: Comfort Functions Of The Sh624 Comfort Remote Control
BASIC OPTIONS 7.6 Comfort functions of the SH624 Comfort Remote Control ☺ Switch and dim lights remotely. Switch the garden lamps on from your bedroom when you hear suspicious noises. Switch (4) SEC setting: The bottom five buttons (1) are used to switch the Haibrain X-10 modules with corresponding addresses (UnitCodes 1-5). -
Page 25: Clearing The Timer Settings
7. When a timer is shown, you can press CLEAR to delete the timer. 8. You need to confirm your choice (CLEAR TIMER). Press1 for Yes and 2 for No. 9. Press CLEAR again to quit the menu. SAFEGUARD / TOTALGUARD... -
Page 26: Advanced System Functions
EXTRA OPTIONS 8. Advanced system functions 8.1 Setting the delays You can set a number of delay times via the menu DELAYS: ENTRY DELAY The time you get to switch off the system after entering your house (factory setting 30 seconds). EXIT DELAY The time you get before the system is switched on when you leave your house (factory setting 60 seconds). -
Page 27: Changing The Access Code (Pin)
7. OPTIONS. Press OK to select this menu item. You can also go to this menu item directly by pressing a 7 on the number pad. 5. Use the menu buttons to go to menu item CHIME. Press OK to select this menu item. SAFEGUARD / TOTALGUARD... -
Page 28: Using Wired Inputs
EXTRA OPTIONS 6. Choose 1 for CHIME ON or 2 for CHIME OFF. 7. Press CLEAR again to quit the menu. To confirm your choice, press 1 for Yes or 2 for No. If you choose Yes, you will quit the menu. -
Page 29: Emergency Sensors
6. You are asked to confirm CLEAR ZONE 1. YES 2. NO. 7. Press 1 to erase the zone. The zone number is shown on the display. 8. Press CLEAR again to quit the menu. ☺ Zones 31 and 32 cannot be erased. SAFEGUARD / TOTALGUARD... -
Page 30: Deregistering A Motion Detector
EXTRA OPTIONS 9.7 Deregistering a Motion Detector 1. To access the menu, press the menu or menu button. The display will now read ‘ENTER PIN’. 2. Enter your 4-digit PIN code (factory setting 0000. See 8.3 for changing the PIN code). For every digit entered, a * will appear on the display. -
Page 31: Using An External Universal Siren
Haibrain X-10 modules. If you change the HouseCode of the console, the addresses for the Home Automation functions also change. Example: You change the HouseCode from A into C. SAFEGUARD / TOTALGUARD... - Page 32 EXTRA OPTIONS Name Description Module set to address Comfort lighting Reacts to the Lights ON and Lights OFF button on your key chain remote control. C1 and C2 Exit delay Lights are switched on during the exit delay. C1 and C2 Alarm lighting In the case of an alarm, the lights will flash during 4 minutes and then remain on.
-
Page 33: Telephone Functions
ANSWER TYPE. Press OK to select this menu item. 6. You can now select ANSWER ON, ANSWER OFF or VOICE MAIL. 7. Use the menu buttons to go to the desired menu item and press OK. 8. Press CLEAR again to quit the menu. SAFEGUARD / TOTALGUARD... -
Page 34: Operating The Alarm Functions Via An Outside Phone
EXTRA OPTIONS 11.3 Operating the alarm functions via an outside phone 1. Call your home number. The console will answer. 2. You will hear ‘Please enter PIN’. Enter your PIN code. 3. If your PIN is correct, you will hear ‘PIN accepted’. If your PIN is incorrect, you will hear ‘Error’. 4. - Page 35 ARMED AWAY. If the sensor has remembered its code, the alarm will go off when you walk past the sensor. If nothing happens, you need to reregister the motion detector (see 4.2.3). Delete the zone (see 9.7) and reregister the sensor (see 4.2.3). SAFEGUARD / TOTALGUARD...
-
Page 36: Frequently Asked Questions
EXTRA OPTIONS 13. Frequently asked questions Why does the security system not work? Check whether you see any text on the console display. If not: check whether the AC adapter is connected to the mains, whether the electrical wire is plugged into the adapter and whether the plug is connected to the console. Check whether you can control the system via the console. -
Page 37: Tabels
_____________________________________________________________________________ ____________________ ________ _____________________________________________________________________________ Wired input 1 ________ _____________________________________________________________________________ Wired input 2 TABEL TELEPHONE NUMBERS Memory position Telephone number Name ___________________ _____________________________ __________________________________________________________ ___________________ _____________________________ __________________________________________________________ ___________________ _____________________________ __________________________________________________________ ___________________ _____________________________ __________________________________________________________ ___________________ _____________________________ __________________________________________________________ ___________________ _____________________________ __________________________________________________________ SAFEGUARD / TOTALGUARD... -
Page 38: Technical Data
Signal transmission: > 5Vpp in 5 Ohm at 120 kHz ± 1 kHz X-10 transmission: 1 pulse burst at 0˚, 60˚ and 120˚ Standard for TotalGuard, optional for SafeGuard: Sends X-10 Key codes: On, Off. RF receiver frequency: 433.92 MHz... -
Page 39: Declaration Of Conformity
DECLARATION OF CONFORMITY Hereby, Haibrain BV, declares that this SC9000 is in compliance with the essential requirements and other relevant provisions of the following Directives: Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity Council Directive 89/336/EEC of 3 May 1989 on the approximation of the laws of the Member States relating to electromagnetic compatibility...
Need help?
Do you have a question about the SafeGuard and is the answer not in the manual?
Questions and answers