Parts List/Reference - SandPro 4517 Owner's Manual

4.

PaRtS liSt/ReFeRence

Before starting installation, check to make sure all parts are present in package .
Primary Components
Base Plate (1)
7 Position Multi-Port Valve (1)
Clamp Ring Assembly (1)
Threaded Connector with O-Ring (3)
Manifold Tube (1)
Hair & Lint Strainer Cover (1)
Pump Mounting Hardware (2 sets)
Note: Some parts may be pre-installed at the factory. Parts not shown to scale.
SAVE THESE INSTRUCTIONS
Water Pump (1)
Manifold (1)
Drain Valve Assembly (1)
Main Tank Seal (1)
Rubber Reducer (2)
1½" - 1¼" Hose Connector (2)
Threaded Collar (1)
6
Filter Tank (1)
Spigot
Filter Pump Hose (1)
O-Ring (3): A-2¼" dia, B-3" dia, C-1½" dia
Hose Clamp (2)
Manifold Fingers (6)
5mm Hex key Owner's Manual