Table of Contents
Advertisement
K
"Channel Setup" setting
Press WEGA GATE and select "Settings".
Press V or v to select the "Channel Setup"
icon (
), then press
"Auto Program"
"Manual Program"
"Program Sorting/Edit"
• If you preset a blocked program number, that program number will be unblocked
automatically.
• If you sort a blocked program, that program will remain blocked.
.
Preset channels automatically.
Manually preset desired channels and channels that cannot
be preset automatically (see Presetting channels manually).
Sort and edit the channels.
(a) If you wish to keep the channels in the current
condition, press WEGA GATE to exit.
(b) Press V or v to select the program number with the
channel you wish to change. The selected channel will
appear on the screen.
(c) If you wish to store the channels in a different order:
(1) Press b to enter sorting mode.
(2) Press V or v to select the new program number
position for your selected channel, then press B.
(d) If you wish to edit the channels, press
edit mode.
Press b until the mode that you wish to edit is
highlighted: Label, Skip,
.
(1) To label, press V or v to select the alphanumeric
characters for the label. Then press
(2) To skip the program number, press V or v to select
"On". Then press
You can skip this program number when using
PROG +/–.
(3) To block unwanted program number, press V or v to
select
. Then press
(e) Repeat step (b) to (d) if you wish to change other
channels.
Press WEGA GATE to exit.
Channel Setup
Auto Program
Manual Program
Program Sorting/Edit
Select
Confirm
to change to
(block symbol). Then press
.
.
.
End
Advertisement
Table of Contents
