Panasonic SC-BT730 Settings Manual page 2

3
Connect the cables
Connect the cables by color or by the numbers indicated in the illustration to
the appropriate terminals on the rear panel of the unit.
BLUE GRAY PURPLE GREEN RED
    
SPEAKERS
ENCEINTES

LS / RB LB / RS

SURR
6 5 2
R
6 Ω 6 Ω 3 Ω
Wireless
SUBWOOFER CENTER FRONT
system
Main unit's speaker terminals
Surround selector
(rear panel)
The surround
selector switch
HDMI cable (not included)
must be set in the
(Recommended for highest quality picture)
center position.
AV IN
VIDEO IN
TV
L
AUDIO OUT
R
OPTICAL
OUT
4
Turn on the system
1
Connect the AC power supply cord
Connect the AC power supply cord to the main unit before connecting to the household AC outlet.
For units with PX printed on the packaging: AC power supply cord with a label is for the wireless system.
Wireless Main unit
(For units with PX printed on the packaging)
system
Before connecting the AC power supply cord;
Set the voltage.
AC IN
Use a fl at-head screwdriver to move
AC IN
the voltage selector to the appropriate
V
position for the area in which this system is used.
If the power plug does not fi t your AC outlet,
AC power supply
use the AC plug adaptor (included).
cord
(included)
If it still does not fi t, contact an electrical parts distributor for
assistance.
To a household AC outlet
For detailed information, refer to the operating instructions.
Adhesive tape
WHITE
FM indoor antenna
(included)

OPT
AV
OUT
1
L
VIDEO
LAN
AUX
OUT
(ARC)
* 1 Make sure that this
video connection
is made to view
photos/videos from
Video cable* 1 (included)
the iPod/iPhone.
Audio cable (not included)
Optical digital audio cable (not included)
VOLT ADJ
110 127V 220 240V
If you have any questions contact
Digital
transmitter
DIGITAL AUDIO IN
OPTICAL
DIGITAL TRANSMITTER
1 2
FM ANT
(75Ω)
The main unit shows the model
for the U.S.A. and Canada.
Audio connection
For best quality audio, use the HDMI cable (with
an ARC compatible TV) or an optical digital
audio cable.
If your TV does not support the above, use the
audio cable.
2 3
Turn on the TV Turn on the system
Turn on your TV and select the
Press [ ] to turn
appropriate video input mode (e.g.,
on the main unit.
VIDEO 1, AV 1, HDMI, etc.) to suit the
connections to this unit.
Installing batteries in
the remote control
Press and ensure the
WIRELESS LINK indicator
lights up green.
U.S.A. and Puerto Rico: 1-800-211-PANA (7262)
Mon-Fri 9 am–9 pm (EST) Lunes-Viernes
Sat-Sun 10 am–7 pm (EST) Sabado-Domingo
Other connection
Broadband Network Connections
(Optional)
DIGITAL TRANSMITTER
By connecting this unit to the network, you can use the BD-Live
and VIERA CAST features.
The main unit shows the model for the U.S.A. and Canada.
Main unit
5
6 Ω
ENTER
Shielded LAN cable
(not included)
Modem (Broadband)
• Provided by ISP
4
The on screen display will guide you
through the steps.*


R6/LR6, AA
Press [, ] to select [Yes/Oui/Sí].
* 2 If you want to restart the Smart setup:
POWER
WIRELESS LINK
Refer to "STEP 6: Smart setup / Easy
Wireless system setup" in the operating instructions.
Canada:
Telephone: 1-800-561-5505
E-mail link: "Customer support" on www.panasonic.ca
(10BASE-T/ 100BASE-TX)
LAN
Broadband router, etc.
The Smart setup
starts
2
Smart setup
Would you like to start smart setup?
Voulez-vous amorcer le Réglage intelligent ?
¿Quiere empezar la Smart Setup?
Yes/Oui/Sí No/Non/No
OK
RETURN