Samsung 450 Series Installation Manual page 50

The picture below shows a sample Channel Editor screen.
20-2
27 ----- (Air)
50-1 CH 50.1
50-3 CH 50.3
51-1 KUSI-HD
73 ----- (Cable)
HDMI1
HDMI3
• a Indicates an analog channel.
• Channels without an a are digital channels.
✎ If Dynamic SI in the Hospitality Option Menu is On, Channel Editor will display no digital channels. You must set Dynamic SI to
Off before you can edit digital channels in Channel Editor.
• The guide at the bottom of the Channel Editor menu displays the remote buttons you need to press to apply Channel
Editor functions.
1 Using the remote's up or down arrow key, highlight the channel that you want to edit.
– To edit more than one channel, move the highlight to a channel, and then press the
appear in the check box next to the channel. Repeat for each channel you want to edit.
2 To delete the channel or channels you selected from the channel list, press the red button on the remote.
– To delete two or more channels simultaneously, select multiple channels in Step 1, and then press the red button
on the remote.
✎ If you want to delete the scambled channels, you should run the process below Hotel option > Channel >
Channel Setup > Channel Settings > Clear Scrambled Channel.
3 Press the green button on the remote to select all channels.
4 To apply the video mute, press the yellow button on the remote.
– To apply the video mute to two or more channels simultaneously, select multiple channels in Step 1, and then
press the yellow button on the remote.
5 To view information about a channel, press the
6 Press the TOOLS
Channel Editor Functions and Remote Button
a Red (Delete): Deletes a channel from the channel list.
b Green (Select All): Selects all channels at once.
{ Yellow (Video Mute On/Off): You can set the Video Mute On/Off.
U (Page): Moves to next or previous page.
` (Information): Display details of the selected channel.
T (Tools): Displays the option menu.
R (Return): Returns to the previous step or exits.
50
English
22 ----- (Air)
30 ----- (Air)
50-2 CH 50.2
50-4 CH 50.4
72 ----- (Cable)
81 ----- (Cable)
HDMI2/DVI
AV
button on the remote to rename a channel or change the channel number.
INFO button on the remote.
E key. A check will
ENTER