Samsung 450 Series Installation Manual page 16

HG40ND678 / HG48ND678 / HG55ND678
1
2
3
✎ Connect an external device to your TV, make sure that the TV and the device are turned off.
✎ When connecting an external device, match the color of the connection terminal to the cable.
HDMI IN
1
– Connects to the HDMI jack of a device with an HDMI output.
✎ No separate sound connection is needed for an HDMI to HDMI connection. HDMI connections carry both
audio and video.
USB / CLONING
2
– Connector for software upgrades and Media Play, etc.
– Service connection.
VIDEO / L-AUDIO-R
3
– Connect a VIDEO cable to an appropriate external A/V device such a VCR, DVD, or Camcorder.
– Connect audio cables to "L-AUDIO-R" on your TV and the other ends to corresponding audio out jacks on the A/V
device.
EX-LINK
4
– Connect this jack to the jack on the optional RJP (Remote Jack Pack). The RJP allows you to connect external
devices (Camcoders, PCs, DVD players, etc) easily.
AUDIO OUT
5
– Connects to the audio input jacks on an Amplifier/Home Theater.
or
ANT IN AIR/CABLE
6
– To view television channels correctly, the TV must receive a signal from one of the following sources:
– An outdoor antenna / A cable television system / A satellite receiver.
DATA
7
– Used to support data communication between the TV and the external SBB or STB.
– Connects using an RJ-12 type of plug.
16
English
1
HDMI IN
3 (ARC)
HDMI IN 2
(DVI)
GAME
HDMI IN 1
CONTROL
DATA
(5V 0.5A)
/CLONING
EX-LINK
AV IN
4
5
AUDIO OUT
8
ANT IN
AIR/CABLE
6