TP-Link TL-WN722N Quick Installation Manual

Quick
Installation
For Mac OS X
Guide
150Mbps High Gain Wireless USB Adapter
MODEL NO. TL-WN722N
This USB Adapter can be powered only by computers that comply with Limited
7106506469 REV8.0.0 Power Source (LPS).
1
Connect to a Computer
Option 1: Directly Option 2: Via the USB Extension Cable
3
2
Install Driver and Utility Join a Wireless Network
a. Insert the CD. Option 1: Via TP-LINK Utility
Note: You can also download the driver at www.tp-link.com.
a. Click
b. Browse the CD, go to TL-WN722N > Mac OS
Utility) on the menu bar.
X Driver, unzip the Mac OS X 10.6_10.11.zip
b. Select your Wi-Fi network and enter the Wi-Fi
file and run the Installer.
password when prompted.
c. Follow the wizard to complete the installation.
SHELL
Installer.pkg uninstall.command
Option 2: Via Wi-Fi Protected Setup
(TP-LINK Wireless Conf i guration
a. Press the WPS button on your router.
b. Within 2 minutes, press and hold the WPS button on
the adapter until the WPS Progress screen appears.
Fri 5:14 PM
USB-WiFi: On
Turn USB-WiFi Off
TP-LINK_A
34567_TEST
abcdef_0903
AAAAAA
Join Other Network
WPS
c.
When you are prompted "WPS Protocol Finished!",
Open Wireless Utility
click OK.
(WPS)