Setting Up Your Remote; What To Expect During Set Up - Logitech Harmony 900 User Manual

Setting Up Your Remote

What to expect during set up

Be sure you have gathered your device information using the
you start.
When you insert the Harmony remote CD, the guided online setup launches. Follow the easy
setup instructions to install the Harmony Remote Software.
After the software installs, your Harmony Remote Software will start, check for updates
automatically and download them if necessary. The software will launch and the setup process
guides you through five steps in which you answer a series of questions about how your
entertainment system is set up.
1. Creating your Account and Connecting your Remote
creating an account on the Harmony Remote Software and ensures your computer and
Harmony 900 are communicating with each other.
2. Set up Devices:
numbers of your entertainment system that you collected using the
3. Set up Activities
system is set up, and then saves the settings.
4. Update Remote and Test
to the remote and allows you to disconnect and test.
5. Set Up Your RF System and Test:
up and test your RF system.
10
the software walks you through entering the manufacturer and model
: the software asks you questions about how your entertainment
: the software transfers the information from your computer
your remote screen will walk you through steps to set
Gathering your device information
To simplify the setup process, we recommend you fill out the
Worksheet, so that all the device information is at hand when you need it.
Locating manufacturer and model number on your devices
Manufacturer names and model numbers are typically found at the front
of a device, on a label on the back of the device, or in the User Manual for
that device.
Universal Remote Control v. Universal Electronics, Trial No. IPR2014-01106
Device Worksheet before
: the setup walks you through
Device
Device
Universal Electronics Exhibit 2036, Page 10
Worksheet.