Battery Replacement; Battery Disposal; Specifications - Vector Start-IT VECO21 ST Owner's Manual

5. EMERGENCY/WORK LIGHT
Bulb Replacement
You will need a small Phillips screwdriver
1. Replacement bulbs are available from Vector® Customer Service Department; call (954) 584-4446 EXT. 19 or toll-free (866) 584-
5504
2. Remove two Phillips screws from the lens.
3. Lift off the lens assembly.
4. Remove the burned-out bulb.
5. Replace with a new bulb (12-volt 0.4 amp Krypton bulb).
6. Snap the lens cover back into place, and replace Phillips screws.

6. BATTERY REPLACEMENT

IT IS RECOMMENDED THAT THE UNIT BE RETURNED TO VECTOR® CUSTOMER SERVICE FOR BATTERY
REPLACEMENT: CONTACT (954) 584-4446 EXT. 19, OR TOLL-FREE (866) 584-5504
6.1

Battery Disposal

Contains a maintenance-free, sealed, non-spillable, lead acid battery, which must be disposed of properly. Some states require recycling
— contact your local authority for information.
THIS UNIT CONTAINS A MAINTENANCE-FREE, SEALED, NON-SPILLABLE, LEAD ACID BATTERY
WHICH MUST BE DISPOSED OF PROPERLY. SOME STATES REQUIRE RECYCLING. DISPOSAL QUESTIONS? IN USA,
CALL 1 -877-288-7722.
WARNINGS:
. DO NOT DISPOSE OF THE BATTERY IN FIRE AS THIS MAY RESULT IN AN EXPLOSION.
. BEFORE DISPOSING OF THE BATTERY, PROTECT EXPOSED TERMINALS WITH HEAVY-DUTY
ELECTRICAL TAPE TO PREVENT SHORTING (SHORTING CAN RESULT IN INJURY OR FIRE).
. DO NOT EXPOSE BATTERY TO FIRE OR INTENSE HEAT AS IT MAY EXPLODE.

7. SPECIFICATIONS

Model
Voltage
Boost Power
Peak Ampere Power
Battery Type
Bulb
Booster Cables
Accessory Socket Self-Resetting Breaker
Charging Cord
Adapter/Charger
HEIGHT
DEPTH
WIDTH
WEIGHT
400 Instantaneous Cranking Amps
Non Spillable Sealed, lead- acid, rechargeable,
maintenance-free, 12-volt DC,19 Amp-hour
12-volt 0.4 Amp Krypton
#5AWG welding cable
with 400 Amp copper clamps
110/120-Volt AC
(800mA, 12-Volt DC Output)
11-3/4" (29.845CM)
6-1/4" (15.875CM)
11-5/8" (29.528CM)
18LBS. (8.164KG)
VECO21 ST
12 VDC
1200 Amps
20 Amps
12-Volt DC