Restarting; Initializing The Settings - Panasonic BB-HGW700A Operating Instructions Manual
Network camera management system
Hide thumbs
Also See for BB-HGW700A:
- Operating instructions manual (152 pages) ,
- Service manual (33 pages) ,
- Installation & troubleshooting manual (32 pages)
Table of Contents
Advertisement
Operating Instructions
3.3.4
Restarting
When restarting, this product's setup information is saved.
1.
Click [Restart] on the setup page.
2.
Click [Restart].
•
This product is restarted.
Notes
•
When using the DHCP server function (see page 74), restart all LAN (Home) side PCs
connected to this product.
•
When this product is restarted, applications will remain in the current status (executed or
disabled).
3.3.5
Initializing The Settings
This function resets all settings to the factory default. (see page 131)
1.
Click [Factory Default] on the setup page.
2.
Click [Factory Default].
•
All settings are reset.
Notes
•
When using the DHCP server function (see page 74), restart all LAN (Home) side PCs
connected to this product.
•
Applications cannot be reset to factory default. When resetting factory default, all
applications are disabled. Execute the application function on the setup page.
98
Advertisement
Table of Contents
