Panasonic BB-HGW700A Operating Instructions Manual page 93

Application E-mail
This function allows you to set mail forwarding used in the application platform function.
• This setting may be necessary depending on the application.
1.
Click [E-mail Setup for Applications].
2.
Set each heading and click [Save].
3.
Click [Restart].
Data Entry Field
SMTP Server IP
Address or Host Name
POP3 Server IP
Address or Host Name
Login ID
Password
Reply E-mail Address*
Destination E-mail
Address 1 - Destination
2
E-mail Address 5*
*1 Set 4 numbers (0-255) and 3 periods, in the form of 192.163.0.253 (However 0.0.0.0 or
255.255.255.255 cannot be used.)
*2 Only alphanumeric characters can be used. However, [Space], ["], ['], [#], [&], [%], [=], [+], [?], [<],
[>], and [:] cannot be used.
*3 When POP3 authentication is required during mail forwarding, set it, checking with the network
administrator or ISP.
Note
SMTP authentication is not supported.
Enter the sent mail (SMTP) server's address*
2
characters)* .
Enter the received mail (POP3) server's address*
2
255 characters)* .
Enter the received mail (POP3) server's login ID.*
Enter the received mail (POP3) server's password.*
2
Enter the return destination's (sent source) E-mail address. It is
recommended that you enter the administrator's E-mail Address.
Up to 5 E-mail destinations can be set.
[For assistance, please call: 1-800-272-7033]
Operating Instructions
1
or host name (1-255
1
or host name (1-
3
3
93