Support Cst; Base Assembly P4; Opener Lid; Arm Assembly T/Up - Aiwa HV-FX7800 Service Manual

DECK MECHANISM DISASSEMBLY

Support CST

15. Support CST (Fig. A-5-1)
1) Break away the (A) part shown above Fig. A-5-1 from
the Embossing of the Chassis in the clockwise direction,
and lift up the Support CST.
16. Base Assembly P4 (Fig. A-5-2)
1) Break away the (B) part shown above Fig. A-5-2 from
the Embossing of the Chassis in the counterclockwise
direction and lift up the Base Assembly P4.
17. Opener Lid (Fig. A-5-3)
1) Break away the (C) Part of the Opener Lid from the
Embossing of the Chassis in the Clockwise direction and
lift up the Opener Lid.
18. Arm Assembly T/up (Fig. A-5-4)
1) Just lift up the Arm Assembly T/UP.
(D)

Arm Assembly T/up

(Fig. A-5-4)

Base Assembly P4

(Fig. A-5-1)
(A)
(Fig. A-5-2)
Fig. A-5

Opener Lid

(Fig. A-5-3)
(C)
(B)
NOTE
(1) When reassembling, confirm the opener lid is placed on
the Hook(H1) of the Arm Assembly T/UP as below figure.
Opener Lid
(H1)
19. Arm Assembly Pinch (Fig. A-5-5)
1) Lift up the Arm Assembly Pinch.
-73-
Arm
Assembly
Pinch
(Fig. A-5-5)
Arm Assembly T/up