Dukane 8934 Operating Manual page 15

Network Bridge Communication
This projector is equipped with NETWORK BRIDGE function.
When the projector connects to the computer by wired LAN communicaton, an
external device that is connected with this projector by RS-232C communication
can be controlled from the computer as a network terminal.
For details, see the 3. Network Bridge function in the Network Guide.
Connection
If you use wired LAN, connect the computer's LAN port and the projector's LAN
1.
port with a LAN cable. Use the cable that fulfi lls the specifi cation shown in fi gure.
Connect the projector's CONTROL port and the RS-232C port of the devices
2.
that you want to control with a RS-232C cable.
Turn the computer on, and after the computer has started up turn the
3.
projector on.
Set the COMMUNICATION TYPE to NETWORK BRIDGE. (&OPTION menu
4.
- SERVICE - COMMUNICATION in the Operating Guide)
LAN
LAN cable
(CAT-5 or greater)
LAN
CONTROL
Network Bridge Communication
RS-232C
15