Soft Sw - Yamaha RX-V459 Service Manual

21. SOFT SW

Note) Changing the function setting may hinder the
proper operation.
This menu is used to switch the function settings on P.C.B.
through the software so as to activate the product.
The protection function follows the P.C.B. settings. When
connected to AC or in the maker preset state, the unit is
initialized to the P.C. B. setting. Display of each function
after initialization varies depending on settings on P.C.B.
The operation mode can be changed by selecting the sub-
menu and then using the STRAIGHT key.
SW MODE: PCB, MODEL or FNC can be selected.
MODEL SETTING: 759SE, V659, H5960, V559, H5950,
V459 or H5935 can be selected. (SW MODE: Selectable
when MODEL has been selected.)
DESTINATION: J, U, C, R, T, K, A, B, G (E) or L can be
selected. (SW MODE: Selectable when MODEL has been
selected.)
TUNER DESTINATION: J, UC, ABG or RL can be selected.
(SW MODE: Selectable when FNC has been selected.)
TUNER TYPE: NRM, RDS or XM can be selected. (SW
MODE: Selectable when FNC has been selected.)
VIDEO FORMAT: NTSC or PAL can be selected. (SW
MODE: Selectable when FNC has been selected.)
21.SW :PCB
21.MODEL:V459
21.DEST :G
21.TuDst:ABG
21.TuDyp:RDS
21.VIDEO:PAL
RX-V459/HTR-5940/DSP-AX459
HTR-5935
35