●
Connections require that a memory card be in the camera.
●
Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [
choose the device and then pressing the [
] button. To add a
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
●
If you prefer not to display recent target devices, choose MENU
( = 27) > [
] tab > [Wi-Fi Settings] > [Target History] > [Off].
●
You can also send multiple images at once and change the image
size before sending ( = 109).
●
You can send the current image by choosing [Send this image] on
the screen in step 6.
Using Another Access Point
When connecting the camera to a smartphone with the [ ] button or
][
] buttons to
through the Wi-Fi menu, you can also use an existing access point.
1
Prepare for the connection.
●
Access the [Waiting to connect] screen
by either following steps 1 – 3 in "Sending
to a Smartphone Assigned to the Button"
( = 93) or steps 1 – 4 in "Adding a
Smartphone Using the Wi-Fi Menu"
( = 94).
2
Connect the smartphone to the
access point.
3
Choose [Switch Network].
●
Press the [ ][ ] buttons to choose
[Switch Network], and then press the [ ]
button.
●
A list of detected access points will be
displayed.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
96