Page 2
1. TF Card Slot 13. Rack Pad (open) Left 2. Reset Button 14. Sensor-Aligning Steering 3. Mic 15. AV In Interface(Optional) 4. Power Button 16. AV Out Interface 5. Mic Indicator (red) 17. USB Interface 6. Mic Button 18. 3M Adhesive Tape 7.
Page 3
Device Installation 1. Insert the TF card into the card slot with right direction. 2. Install the device on the wind shield or on the driving instrument board with rack pad. &Use clean and soft cloth to rub away the dirt and moisture on the wind shield or instrument board.
Page 4
*Switching the normal/reverse phase of video camera To switch the normal/reverse phase of recording, Long Press "Mic" Button for 3 seconds to switch sensor positive shooting. Long Press "Rec" Button for 3 seconds to switch sensor inverted shooting. (The system will save the setting of normal/reverse phase switching) *G-sensor Function When device is in recording, if there is serious collision to device, “...
Page 5
Button Function overview Button Function under Video Recording...
Page 6
Button Function in Playback Mode Technical specifications:...
Page 7
Accessories included Notes: 1) Please insert the TF card before recording. 2)The device default storage time is 2min. When the storage medium is full, it will record from the beginning again and erase over the previously recorded material automatically. It will have 3 seconds pause time, and namely the contents in the 3 seconds will not recorded.
Need help?
Do you have a question about the DCAM-002 and is the answer not in the manual?
Questions and answers