Powder Container Set Up; Clean Internal Parts - Before First Use - Baby Brezza Formula Pro Instructions For Setup

Powder Container set up

Wash: Funnel, Funnel Cover, Inside of Water Tank, and all Powder Container parts (see page 2).
After washing, make sure all Powder Container parts are COMPLETELY DRY before assembly.
Set up the Measuring Wheel to work with your powder type.
1 2
Select Measuring Wheel
setting 1 - 10 by using the chart
on the back cover of this booklet.
Numbers on Numbers on
Lower Measuring Wheel Lower Measuring Wheel
Press upper & lower halves of Measuring Wheel together so your powder's setting number shows through
window on the Upper Measuring Wheel. You have now assembled your Measuring Wheel.
Set up the Powder Container and parts.
3 4
Place Powder Container on Base Place assembled Measuring Wheel
with "MIN" & "MAX" lines facing front.
5a 6
Locking Cover should look Place Stirring Wheel In Powder
like this when inserted properly. Container, align with axle and
push down so it touches the
3
2a
Example : Example :
Assembled Assembled
Measuring Wheel Measuring Wheel
set to #5 set to #5
5
1
In Powder Container.
1. Place the front edge of Locking
Cover under the tab in the
Powder Container.
2. Press down on back edge
to lock in place.
Don't add powder yet.
Follow the steps on the next
page to run an internal
cleaning cycle BEFORE using
the Formula Pro® with
powder.
Locking Cover.
Clean internal parts - before first use - without powder
After setting up the powder container, run a cleaning cycle to rinse internal parts.
1
Make sure tab is in the back
Don't add
powder
Place Powder Container Lid
on Powder Container as shown.
4
2
Don't add
powder
Fill water tank to MAX line with
distilled water.
Your Formula Pro® is now ready to use with powder.
Follow the steps on pages 5 and 6 to prepare bottle with the Formula Pro®
Always use a clean and sterilized bottle, nipple or other feeding equipment.
Wash and dry hands before handling sterilized bottles.
Make each bottle as needed, and do not store mixed formula for later use.
2 3
Turn Powder Container Lid Plug in machine and turn
Clockwise to lock into place. power switch to on position.
5 6
pressing ounce button
Press start to begin rinsing.
The Formula Pro® will stop after
dispensing 10oz of water.
Place 10 ounce or larger container
Dispose of the water captured in
to catch water.
Choose 10 oz. size by
4 times.
the container.
4