Removing The Stand Holder - Lenovo B40–30 Hardware Maintenance Manual

Step 6. Locate the optical removal notch, and then use a screw driver push the optical drive out.
Step 7. Push a small iron stick (paper clip) into the small hole on the optical drive cover so that the disk
springs out as shown.
Step 8. Remove the 2 screws that secure the optical drive to the metal bracket.
Step 9. Use a small flat head screwdriver to press and push out the pins that secure the cover to the
2 3
disk.
Step 10. Separate the cover from the defective optical drive.
Step 11. To install the new optical drive:
a. Align the new optical drive with the cover, and then push the cover back into position.
b. Slide the new optical drive into the drive bay.
Step 12. Reattach the foot cover and stand base.

Removing the stand holder

Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
28
Lenovo B40–30 All-In-One Computer Hardware Maintenance Manual
1