Cable Box Connections - Magnavox 26MF605W Series Owner's Manual

I
f you have a Cable Box, follow either set of
these steps to complete your connections.
Disconnect all power sources before
making any connections.
Cable Box with RF In/Out Jacks
This connection will not supply Stereo sound to
the LCD TV.
1
Connect the Cable TV signal to the IN jack
(or RF IN or CABLE IN) on the Cable Box.
2
Connect an RF coaxial cable (not supplied)
to the OUT jack (or TO TV or RF OUT) of
the Cable Box.
3
Connect the other end of the coaxial cable
to the TV jack (marked 75
of the LCD TV.
4
Set the Channel (or Output channel) switch
of the Cable Box to 3 or 4. Set the TV to
the same channel. When watching TV
programming, change channels at the Cable
Box, not the LCD TV.
Cable Box with AV (Audio/Video) Out
Jacks
This connection will supply Stereo sound to the
LCD TV.
1
Connect the Cable TV signal to the
IN jack (or RF IN or CABLE IN) on the
Cable Box.
2
Using an RCA-type Video and Audio cable
(marked with yellow, red, and white),
connect the Cable Box's Video and Audio
Out jacks to the TV's Video and Audio In
jacks.
Note:
1. If your Cable Box is equipped with a
S-Video Out Jack, use the S-Video
connection for a better picture detail
and clarity. Use the S-Video cable to
connect the Cable Box's S-Video Out
jacks to the TV's S-Video In jacks.
2. You can also use the Video and Audio
jacks in AV IN 2 and AV IN 3 located
on the rear of the TV to connect your
Cable Box.
3. Use the SOURCE button on the remote
control to select AV 1 (or AV2, AV3,
S-Video1, or S-Video2 if you use the
different jacks for this hookup) to watch
Cable TV (your Cable Box must be
turned on).
MAG-26_eng 0104.indd 10
C B
ABLE OX
Ω
) on the rear
C
ONNECTIONS
2
CABLE TO
IN TV
Cable Box
1
The Cable TV singal from Cable Company
OUTPUT
CH
3 4
L
AUDIO
CABLE TO
IN TV
Cable Box
Cable TV singal
1
10
Ω
75 coaxial cable
OUTPUT 4
CH
3 4
2
R
VIDEO
OUT
S VIDEO
OUT
3
1/6/2005 10:30:38