Do you have a question about the CPT-60 Custom Control Total Touch and is the answer not in the manual?
Questions and answers
Harvey Lee
March 1, 2025
Digital Shade control buttons fail to light when handle is depressed, but elements heat up for about one minute. Handle releases automatically and three lights come on. Toaster then behaves normally with shade control and all other functions working OK. After sitting until cool down, shade control lights go out again and must repeat sequence above to get toaster working again. ( Cuisinart Electronic Toaster, Model CPT- 60)
1 comments:
Mr. Anderson
March 1, 2025
Possible causes for the digital shade control buttons failing to light on the Cuisinart CPT-60 Custom Control Total Touch toaster when the handle is depressed include:
1. Power Issue – Ensure the toaster is plugged into a working electrical outlet. 2. Unplugged or Reset Condition – If the toaster was recently unplugged, it may have reset, requiring a new shade selection. 3. Faulty Connection – Check if the power cord is securely connected. 4. Internal Malfunction – The electronic controls may be faulty or require servicing. 5. Button or Circuit Issue – A defect in the touchpad or internal circuits may prevent the lights from functioning.
If troubleshooting does not resolve the issue, the toaster may need repair or replacement.
This answer is automatically generated
Subscribe to Our Youtube Channel
Related Manuals for Cuisinart CPT-60 Custom Control Total Touch
Summary of Contents for Cuisinart CPT-60 Custom Control Total Touch
Page 1
INSTRUCTION BOOKLET Custom Control ™ Total Touch ® CPT-60 Electronic Toaster For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
Cuisinart Repair Center for examination, repair, or mechanical or electrical adjustment. Features and Benefits ..............Page 3 7. The use of accessory attachments not recommended by Cuisinart may Use and Care ................Page 3 cause injury. Helpful Browning Notes ..............Page 4 8.
FEATURES AND BENEFITS 11. High Rise Carriage Toast rises practically to the top of the toaster, making it easy to 1. Extra Wide & Long Toasting Slot remove even small items like English muffins. 12. Slide-out Crumb Tray 1-3/4” wide toaster slot is 11” long. 2.
Your selected setting will remain in memory until you press the “Cancel” you wish to stop the cycle before it is finished, simply press the button, change the setting by pushing the “Lighter” or “Darker” button, or “Cancel” button. You can also lift up the carriage / start lever to unplug the toaster.
Regular Size Corn Muffins: CUSTOM SETTINGS (3-4 oz., 3-1/2” diameter) can be toasted using the “Bagel” button and a light to medium setting. 1-Slice Button Regular Size Blueberry Muffins: (3-4 oz., 3-1/2” diameter top) may require 2 cycles. We recommend using the “Bagel”...
cycle to toast your bagel at the color level selected with the touchpad shade 3. Press the “Defrost” button. control. The “Bagel” button is designed for the most popular bagel size The LED will illuminate when this feature is selected. 4.
WARRANTY. This warranty gives you specific legal rights, and you may storage cleats on the underside of the toaster. have other rights which vary from state to state. If you have any questions about the safety features of your Cuisinart ® Toaster, please call us, toll-free, at 800-726-0190.
Need help?
Do you have a question about the CPT-60 Custom Control Total Touch and is the answer not in the manual?
Questions and answers
Digital Shade control buttons fail to light when handle is depressed, but elements heat up for about one minute. Handle releases automatically and three lights come on. Toaster then behaves normally with shade control and all other functions working OK. After sitting until cool down, shade control lights go out again and must repeat sequence above to get toaster working again. ( Cuisinart Electronic Toaster, Model CPT- 60)
Possible causes for the digital shade control buttons failing to light on the Cuisinart CPT-60 Custom Control Total Touch toaster when the handle is depressed include:
1. Power Issue – Ensure the toaster is plugged into a working electrical outlet.
2. Unplugged or Reset Condition – If the toaster was recently unplugged, it may have reset, requiring a new shade selection.
3. Faulty Connection – Check if the power cord is securely connected.
4. Internal Malfunction – The electronic controls may be faulty or require servicing.
5. Button or Circuit Issue – A defect in the touchpad or internal circuits may prevent the lights from functioning.
If troubleshooting does not resolve the issue, the toaster may need repair or replacement.
This answer is automatically generated