Ken 970C4254 Use & Care Manual page 16

Oven Controls
Setting The Clock
When the appliance is first powered up, 12:00 will flash in the
display (Figure 10). The time of day must first be set before
operating the oven.
Figure 10: 12:00 in display before setting clock
To set clock to 1:30:
1. Press Set Clock.
2. Enter 1 3 0 using numeric keys.
3. Press .
Important note:
The clock cannot be changed when a Cook Time, Self Clean,
Delay Start or cooking feature is active.
Changing Oven Temperature Display
The oven control is preset for temperatures in °F (Fahrenheit)
when shipped from the factory. The control can be changed to
display either Fahrenheit or Celsius.
To change the display to F (Fahrenheit) or C (Celsius):
1. Press and hold Broil for 6 seconds.
2. Once F (or C) appears in the display, press Self Clean to
toggle between Fahrenheit and Celsius temperature display
modes.
3. Press to accept choice.
Important note:
The oven temperature display cannot be changed during the
cooking process or if a Delay Start has been set or Self Clean is
active.
Figure 11: Display showing Fahrenheit and Celsius
Setting 12 hour or 24 hour display mode
The clock display mode allows you to select 12 hr or 24 hr
modes. The factory pre-set clock display mode is 12 hours.
To set 12 hr or 24 hr display mode:
1. Press and hold Set Clock for 6 seconds.
2. Press Self Clean to toggle between 12 Hr day or 24 Hr day
display modes. (Figure
3. Press to accept choice.
Figure 12: 12 Hr dAy and 24 Hr dAy settings
Changing Between Continuous Bake Setting or 12 Hour
Energy Saving
The oven control has a factory preset built-in 12 Hour Energy
Saving feature that will turn off the oven if the oven is left on for
more than 12 hours. The control may be programmed to
override this feature to bake continuously.
To change between continuous bake or 12 Hour Energy Saving
feature:
1. Press and hold Timer Set-Off for 6 seconds
2. Press Self Clean to toggle between 12 Hour OFF or Stay On
(Figure 13) feature.
3. Press to accept choice
Figure 13: 12 hr energy saving (L) and continuous setting (R)
16
12)