Product Warranty - Diginet DGEMSR360P2 User And Installation Manual

Recessed flush mount 360 pir presence sensor
Table of Contents

Advertisement

DIGINET ENERGY MANAGEMENT
12.

Product Warranty

The Recessed Flush Mount 360
manufacturing defects in accordance with the following terms:
1. Nothing in this Warranty affects any person's rights under the Australian Consumer Law. The benefits to any
person under the DIGINET Warranty are in addition to the rights and remedies available under any Consumer
Guarantees.
2. Subject to the other clauses of this Warranty, DIGINET warrants that the Goods will be free of manufacturing
defects and will perform to DIGINET's specifications.
3. The benefit of the DIGINET Warranty extends only to the owner of the property in which the Goods are
installed (the Owner) for two (2) years after the date of purchase (Warranty Period).
4. If within the Warranty Period the Goods fail to perform to DIGINET's specifications as a result of some defect
in material or workmanship in the Goods (Defect) then DIGINET will, at its option, repair the Goods or supply
replacement Goods free of charge.
5. The DIGINET Warranty will not apply to Goods:
5.1.
installed by any person other than a qualified tradesperson; or
5.2.
subjected to misuse, neglect, negligence or accidental damage; or
5.3.
operated in any way contrary to any operating or maintenance instructions; or
5.4.
improperly handled, installed or maintained; or
5.5.
altered or modified prior to or after installation.
6. The DIGINET Warranty does not apply to faulty or defective design of Goods unless DIGINET has designed the
Goods and DIGINET expressly accepts responsibility for such design in writing.
7. In order to make a claim under the DIGINET Warranty, the Owner must:
7.1.
contact DIGINET to obtain a Returned Goods Authorisation Number for the Goods and to be notified
of DIGINET's return address for the Goods by:
7.1.1.
freecall 1300 95 DALI (3254); or
7.1.2.
post to PO Box 314, Padstow NSW 2211; or
7.1.3.
fax to 1300 95 3257; or
7.1.4.
email to sales@diginet.net.au.
7.2.
return the Goods at the Owners expense to the return address notified by DIGINET together with all
accessories, instructions, specifications or other material supplied with the Goods and a notice in
writing:
7.2.1.
stating the Returned Goods Authorisation Number for the Goods;
7.2.2.
describing in detail the defect or fault in the Goods;
7.2.3.
setting out the Owner's contact details (including postal address, email address and
telephone numbers at which the Owner can be contacted during usual business hours).
7.3.
DIGINET will not accept any returned Goods which have not been returned strictly in accordance with
the above instructions.
8. DIGINET will examine any returned Goods and if DIGINET determines that they are defective through no fault
of the Owner and are otherwise undamaged, DIGINET will repair or replace the Goods free of charge.
9. DIGINET will notify the Owner whether it accepts the Goods are defective within a reasonable time of return.
10. DIGINET will not be responsible for any costs of de-installation, re-installation, returning Goods or for
redelivery of the Goods (whether original or repaired and/or replacement Goods) by DIGINET and any other
related expenses of the Owner in claiming under the DIGINET Warranty.
Diginet Control Systems Pty Ltd
o
PIR Presence Sensor and Control Module have a two-year warranty against
Recessed Flush Mount 360
o
PIR Presence Sensor
Page 14 of 16

Advertisement

Table of Contents
loading

Related Products for Diginet DGEMSR360P2

This manual is also suitable for:

Dgemsr360p1

Table of Contents