Cruise Control - Subaru 2014 XV Crosstrek Quick Reference Manual

L

Cruise control

3
1
5
Cruise control indicator
The cruise control main button
is pressed to activate the cruise
control function.
Cruise control set indicator
The vehicle speed has been set to
use the cruise control function.
M
Audio control buttons (if equipped)
6
 Some functions are available on certain models.  For detailed operating and safety information, please consult your Owner's Manual.
Cruise control enables you to maintain a constant vehicle speed
without holding your foot on the accelerator pedal and it is operative
when the vehicle speed is 40 km/h (25 mph) or more.
1
To activate: Press the CRUISE main button.
2 4
2
To set speed: Press the RES/SET switch to the SET side at
desired speed and release it.
3
To increase the speed:
- Press the RES/SET switch to the RES side and hold it, release at
desired speed.
- Depress accelerator pedal, and press the RES/SET switch to the
SET side at desired speed.
- For incremental acceleration, press the RES/SET switch to the
RES side quickly, each tap equals an increase of 1 km/h (0.6 mph).
4
To decrease the speed:
- Press the RES/SET switch to the SET side and hold it, release at
desired speed.
- Depress brake pedal, and press the RES/SET switch to the SET
side at desired speed.
- For incremental deceleration, press the RES/SET switch to the
SET side quickly, each tap equals a decrease of 1 km/h (0.6 mph).
5
To temporarily cancel: Press CANCEL button or depress brake
pedal, clutch pedal (MT). Return to preset speed after it has been
cancelled: RES/SET switch to the RES side.
6
To deactivate: Push the CRUISE main button. Cruise control
is always deactivated when the ignition switch is turned to ACC
or LOCK.
These buttons allow the driver to control audio functions without taking
his/her hands off the steering wheel. For details and operation, please
refer to your Owner's Manual.