Setting A Password - AOpen 2681 User Manual

Parameter
Supervisor Password
is
Set User Password
Setup Supervisor
Password
Set Primary Hard
Disk Password
Password on Boot
Note: Don't forget your password. If you forget your password, you
may have to return your notebook computer to your dealer to reset it.

Setting a password

Follow these steps:
1. Use the ↑ and
Boot, or Hard Disk) and press the Enter key. The password box appears:
2. Type a password. The password may consist of up to eight alphanumeric
characters (A-Z, a-z, 0-9). Press Enter.
Description
Display the status of the Supervisor Password: Set or Clear.
When set, this password protects the computer from
unauthorized entry during boot-up or resume from Hibernation
mode.
Press Enter to set this password.
When set, this password protects the BIOS Utility from
unauthorized entry, and protects critical BIOS parameters.
Press Enter to set this password.
When set, this password prevents the primary hard disk from
unauthorized access. It consists of 8 alphanumeric characters.
Press Enter to set this password. To access this feature, User
Password or Supervisor Password must first be set.
When enabled, a password is requested when the system boots
up.
Options: Enabled or Disabled. To access this feature, User
Password or Supervisor Password must first be set.
↓ keys to highlight a password parameter (Supervisor, User,
67