Searching For A Folder And An Mp3/Wma File; Deleting An Mp3/Wma File - LG CM4550 Owner's Manual

20 Operating
Searching for a folder and an
MP3/WMA file
1. Press PRESET·FOLDER W/S on the remote
control repeatedly until a desired folder appears
in the display window.
2. Press d/M to play it. The first file of the folder
will be played.
,
Note
y USB/CD Folders/Files are recognized as
below.
ROOT
3
FOLDER1
FOLDER4
FOLDER2
FOLDER5
FOLDER6
FILE 1
FILE 2
y If there is no file in a folder, the folder will
not appear.
y Folders will be presented as the following
order;
ROOT FOLDER1
FOLDER8
y File will be played from $ file No.1 to $ file
No.14 one by one.
y Files and folders will be presented in order
recorded and may be presented differently
according to the record circumstances.
y *ROOT : The first screen you can see when
a computer recognize the USB/CD is "ROOT".
FOLDER3
FILE 5
FILE 6
FILE 7
FOLDER7
FOLDER8
FILE 3
FILE 4
FILE 11
FILE 12
FILE 13
FILE 14
FOLDER3 FOLDER7
FOLDER5 FOLDER6

Deleting an MP3/WMA file

You can delete file, folder or format by pressing
DELETE on the remote control. This function is
supported only in stop status. (USB only)
1. - Select the file you want to delete and press
DELETE on the remote control.
- Select the folder you want to delete by
pressing PRESET.FOLDER W/Son the remote
control and press DELETE on the remote
control.
- Press and hold DELETE on the remote control
to format the USB device.
FOLDER
FILE
Press DELETE on the remote control repeatedly
during selecting the MP3/WMA file.
The display changes in the following order.
- DEL FILE : Deletes file
- DEL DIR : Deletes folder
- FORMAT : Formats USB
FILE 8
FILE 9
2. To delete file/folder or format, press d/M
FILE 10 on the remote control or T on the unit.
If you want to exit the current mode,
press Z ENTER on the remote control or
press I on the unit.
>
Caution
y Do not extract the USB device during
operation. (play, delete, etc.)
y Regular back up is recommended to
prevent data loss.
y The delete function may not be supported
according to the USB status.
Or