Advanced Configuration; Port Management; Port Configuration - Xenya XS26GS User Manual

2.3

Advanced Configuration

This page configures whether to globally enable or disable the following protocols:
IGMP Snooping
GVRP
STP
LACP
Authentication
LLDP
LBD
LBD Interval Time
XS View
IGMP Snooping: globally enable or disable the protocol.
GVRP: globally enable or disable the protocol.
STP: globally enable or disable the protocol.
LACP: globally enable or disable the protocol.
Authentication: select authentication between 802.1x or MAC based, or disable the
authentication.
LLDP: globally enable or disable the protocol.
LBD: used to globally enable loopback detection function on this switch. It will check
whether there is a loop on the switch on any VLAN. If there is one on a VLAN, it will shut
down the port or will send out a trap.
LBD Interval Time: time interval for loopback detection, in the range of 5 to 300
(seconds). The default value is 30.
XS View: enable or disable the XS View management software.
2.4

Port Management

This page configures port related management functions as below:

Port Configuration

Port Aggregation
Port Bandwidth
Port Mirroring
XS26GS Managed Optical Ethernet Switch User Manual
6