Specifications - Harbor Freight Tools 47755 Owner's Manual

symbol, is used to address
practices not related to
personal injury.
Additional Safety Instructions
1. Maintain labels and nameplates on
the tool. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
2. Do not run Power Cord under car-
peting. Do not cover cord with throw
rugs, runners or similar coverings. Ar-
range cord away from traffic area and
where it will not be tripped over.
3. Use only in dry environments. Do not
use in bathrooms, laundry area, near
sinks or other sources of water.
4. Do not alter the angle of the blades or
install a different blade on this fan.
5. This product is not a toy. Keep it out
of reach of children.
6. WARNING: Handling cord on this
product will expose you to lead,
a chemical known to the State of
California to cause cancer, and birth
defects or other reproductive harm.
Wash hands after handling. (Califor-
nia Health & Safety Code § 25249.5,
et seq.)
7. The warnings, precautions, and in-
structions discussed in this instruction
manual cannot cover all conditions
and situations that may occur. It must
be understood by operator that com-
mon sense and caution are factors
which cannot be built into this prod-
uct, but must be supplied by operator.
SKU 47755
CAUTION, without
the safety alert
For technical questions, please call 1-888-866-5797.

SPECIFICATIONS

Electrical Requirements 120 V~ / 60 Hz / 2.4 A
Speeds
HOUSEHOLD USE ONLY
UNPACKING
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at the number shown on the
cover of this manual as soon as possible.
Save This Manual
Keep this manual for the safety warn-
ings and precautions, assembly, operat-
ing, inspection, maintenance and cleaning
procedures. Write the product's serial
number in the back of the manual near the
assembly diagram (or month and year of
purchase if product has no number). Keep
this manual and the receipt in a safe and
dry place for future reference.
Low: ~900 RPM
Medium: ~1,030 RPM
High: ~1,080 RPM
E197533
Page 3