Advertisement
symbol, is used to address
practices not related to
personal injury.
Additional Safety Instructions
1.
Maintain labels and nameplates on
the tool. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
2.
Do not run Power Cord (36) under
carpeting. Do not cover Cord with
throw rugs, runners or similar cover-
ings. Arrange cord away from traffic
area and where it will not be tripped
over.
3.
Use only in dry environments. Do not
use in bathrooms, laundry area, near
sinks or other sources of water.
4.
Do not run Fan without Front and
Rear Grills (2, 6) in place.
5.
This product is not a toy. Keep it out
of reach of children.
6.
WARNING: Handling Cord on this
product will expose you to lead,
a chemical known to the State of
California to cause cancer, and birth
defects or other reproductive harm.
Wash hands after handling. (Califor-
nia Health & Safety Code § 25249.5,
et seq.)
7.
The warnings, precautions, and in-
structions discussed in this instruction
manual cannot cover all conditions
and situations that may occur. It must
be understood by operator that com-
mon sense and caution are factors
which cannot be built into this prod-
uct, but must be supplied by operator.
SKU 66950
CAuTION, without
the safety alert
For technical questions, please call 1-800-444-3353.
SpeCIFICATIONS
Electrical Requirements 120 V~ / 60 Hz / .37 A
Speeds (approximately)
HOuSeHOLD uSe ONLY
uNpACkING
When unpacking, make sure item is
intact and undamaged. If parts are miss-
ing or broken, call Harbor Freight Tools at
1-800-444-3353 as soon as possible.
Save This Manual
Keep this manual for safety warnings
and precautions, assembly, operating, in-
spection, maintenance and cleaning pro-
cedures. Write product's serial number in
back of manual near assembly diagram (or
month and year of purchase if product has
no number). Keep this manual and receipt
in a safe place for future reference.
Low: 1120 RPM
Medium: 1280 RPM
High: 1420 RPM
e197533
Page 3
Advertisement
