Summary Of Welding Processes - Lincoln Electric WELDMARK IM806 Operator's Manual

B-5
PROCESS
STICK
TIG/K7930-1/K938-1,
K936-( ) /K892-1
(WITH AMPTROL)
WIRE FEED, LN-25 WITH
INTERNAL CONTACTOR
WIRE FEED, LN-7 WITH
K240 CONTACTOR KIT
OPERATION

SUMMARY OF WELDING PROCESSES

CONTROL
CABLE IDLE
USED MODE
No AUTO
Yes HIGH
No AUTO
Yes HIGH
WELDMARK 225
ELECTRODE
WHEN NOT
WELDING
Hot Touch electrode to work.
Welding starts immediately
and engine goes to high
idle.
Cold Press Amptrol, contactor
closes, welding
starts immediately.
Cold Press gun trigger, LN-25
contactor closes. Welding
starts immediately and
engine goes to high idle.
NOTE: Output Control
must be set above "3".
Cold Press gun trigger,
contactor closes. Welding
starts immediately.
B-5
TO START
WELDING